espHome-NBS-files/a3pool.yaml

esphome:
  name: a3pool

esp8266:
  board: nodemcuv2

ota:
  - platform: esphome
    password: !secret a3poolpasswd

api:
  encryption:
    key: !secret a3poolkey

logger:

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  fast_connect: true
  ap:
    ssid: a3pool_rescue
    password: !secret rescue_ap_password

captive_portal:


binary_sensor:
  - platform: gpio
    pin:
      number: 12
      inverted: true
      mode:
        input: true
        pullup: true
    id: pump_state

datetime:
  - platform: template
    name: Pool Pump Start Time
    id: pool_start
    type: time
    optimistic: true
    restore_value: true
    initial_value: "08:00:00"
  - platform: template
    name: Pool Pump End Time
    id: pool_end
    type: time
    optimistic: true
    restore_value: true
    initial_value: "20:00:00"

button:
  - platform: template
    name: "Sync To Clock"
    on_press:
      then:
        - lambda: |-
            int startSec = (int) (id(pool_start).hour * 3600) + (id(pool_start).minute * 60) + id(pool_start).second;
            int endSec = (int) (id(pool_end).hour * 3600) + (id(pool_end).minute * 60) + id(pool_end).second;
            int nowSec = (id(a3poolTime).now().hour * 3600) + (id(a3poolTime).now().minute * 60) + id(a3poolTime).now().second;
            
            if(!id(control).state){
              // Make sure wierd error or whatever
              return;
            }

            if(startSec < endSec){
              if(startSec < nowSec && nowSec < endSec){
                id(pump).turn_on();
              }
              else{
                id(pump).turn_off();
              }
            }
            else if(startSec > endSec){
              if(endSec < nowSec && nowSec < startSec){
                id(pump).turn_off();
              }
              else{
                id(pump).turn_on();
              }
            }


switch:
  - platform: gpio
    pin: 5
    id: relay
    on_turn_on:
    - delay: 500ms
    - switch.turn_off: relay
  - platform: template
    name: "Automate Control"
    id: control
    optimistic: true
    restore_mode: RESTORE_DEFAULT_OFF
  - platform: template
    optimistic: false
    name: pump
    id: pump
    lambda: |-
      if (id(pump_state).state) {
        return true;
      } else {
        return false;
      }
    turn_on_action:
      - if:
          condition:
            lambda: 'return id(pump_state).state == false;'
          then:
            - switch.turn_on: relay
            - delay: 500ms
            - switch.turn_off: relay
    turn_off_action:
      - if:
          condition:
            lambda: 'return id(pump_state).state;'
          then:
            - switch.turn_on: relay
            - delay: 500ms
            - switch.turn_off: relay

time:
  timezone: "Europe/Vienna"
  id: a3poolTime
  platform: sntp
  on_time:
    - seconds: 0
      months: 4-10
      then:
        - if: 
            condition:
              lambda: 'return id(a3poolTime).now().hour == id(pool_start).hour && id(a3poolTime).now().minute == id(pool_start).minute/* && id(a3poolTime).now().second == id(pool_start).second*/ && id(control).state;'
            then:
              - switch.turn_on: pump
    - seconds: 0
      months: 4-10
      then:
        - if: 
            condition:
              lambda: 'return id(a3poolTime).now().hour == id(pool_end).hour && id(a3poolTime).now().minute == id(pool_end).minute/* && id(a3poolTime).now().second == id(pool_end).second*/ && id(control).state;'
            then:
              - switch.turn_off: pump

dallas:
  - pin: D4
    update_interval: 10s
sensor:
  - platform: dallas
    address: 0xd1000007494b3628
    name: "Pool Temperature"
  - platform: dallas
    address: 0x440000073de2e728
    name: "Solar Temperature"