espHome-NBS-files/a3pool.yaml

esphome:
  name: a3pool
  board: nodemcuv2
  platform: ESP8266

ota:
  password: !secret a3poolpasswd

api:
  password: !secret a3poolpasswd
  encryption:
    key: !secret a3poolkey

logger:

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  fast_connect: true

mqtt:
  broker: !secret mqtt_broker_2
  client_id: "A3 Pool"

binary_sensor:
  - platform: gpio
    pin:
      number: 12
      inverted: true
      mode:
        input: true
        pullup: true
    id: pump_state

switch:
  - platform: gpio
    pin: 5
    id: relay
    on_turn_on:
    - delay: 500ms
    - switch.turn_off: relay
  - platform: template
    name: "Automate Control"
    optimistic: true
    restore_state: true

  - platform: template
    optimistic: false
    name: pump
    id: pump
    lambda: |-
      if (id(pump_state).state) {
        return true;
      } else {
        return false;
      }
    turn_on_action:
      - if:
          condition:
            lambda: 'return id(pump_state).state == false;'
          then:
            - switch.turn_on: relay
            - delay: 500ms
            - switch.turn_off: relay
    turn_off_action:
      - if:
          condition:
            lambda: 'return id(pump_state).state;'
          then:
            - switch.turn_on: relay
            - delay: 500ms
            - switch.turn_off: relay

time:
  timezone: "Europe/Vienna"
  id: a3poolTime
  platform: sntp
  on_time:
    - seconds: 0
      minutes: 0
      hours: 8
      months: 5-10
      then:
        - switch.turn_on: pump
    - seconds: 0
      minutes: 0
      hours: 8
      months: 5-10
      then:
        - switch.turn_off: pump

dallas:
  - pin: D4
    update_interval: 10s
sensor:
  - platform: dallas
    address: 0xd1000007494b3628
    name: "Pool Temperature"
  - platform: dallas
    address: 0x440000073de2e728
    name: "Solar Temperature"