README.md

@@ -1,40 +1,7 @@
 # The NBS espHome config file collection
 This is a collection of all espHome config files!
 
-# Some general things:
-## Why tho?
-Why? You ask me why? Because I want everyone in my family to have access to those files.
-
-## How about changes?
-The general rule about changes is that you can intruduce them yourself and put in a pull request. However, withhin the family I will try to continue and improve stuff as it is so should you have suggestions, I'd like to hear them
-
-## How about passwords and keys?
-Passwords and keys are listed in (secrets.yaml.temple)[this template]. We do not have a way to share the actual secrets.yaml internally within the family but I hope we find a solution to that problem. For now, ask me and I may share it with you.
-
 # A3Pool
-This is a standard config for the a3pool. Nothing special by far with 2 temp sensors and 1 switch.
+This is a standard config for the a3pool. Nothing special by far with 2 temp sensors and 2 switches.
 
-The temperature sensors have the `pool_temperature` and `solar_temperature` and will show report the pool temperature and solar temperature respectively every 10 seconds.
+Better documentation comes later.
-
-There is also one switch that is designed to turn the pump on and off. This works by giving an 500ms long impulse that should turn the pump on/off and sensing on a GPIO ping whenever the pump is currently on/off. This switch carries the name of `pump`. I know HOW CREATIVE...
-**HOWEVER: If the pump is set to off or to the physical clock with physical switch in the garage this will not work!** It will still report it's state correclty however.
-
-There is an other switch that does not have any functionality yet but it's `automate_control` if anyone wants to know.
-
-
-# Table Tennis Count!
-## Table Tennis Footswitch
-The files go by the name of (pingpongfuss.yaml)[pingpongfuss1.yaml].
-While the 1 may be interpreted as just the first of the two sides, it's actually just one nodemcu for both sides. So keep that in mind.
-
-And other disclaimer: **This does not use the native API, or an encryption key, and uses MQTT only. However, that might change in the future**
-
-The topics are as follows:
-
-### Scoring points
-Topic `tabletenniscounter/control/score/count` will be send with the value of either `0` or `1` when ever red or blue should get a point respectively.
-
-### Undoing last points (Up to 10 points)
-Topic `tabletenniscounter/control/score/undo` will be sent with no payload to worry about. The counting part on the respberry pi is supposed to keep a list of the last 10 points.
-
-More infos are added soon!

pingpongfuss1.yaml

@@ -1,90 +0,0 @@
-esphome:
-  name: pingfuss1
-  platform: ESP8266
-  board: nodemcuv2
-
-# Enable logging
-logger:
-
-# Enable Home Assistant API
-# DISABLED - We currently do not need it for operation. Maybe someday
-
-# api:
-#  password: !secret ttfpassword
-
-ota:
-  password: !secret ttfpassword
-
-wifi:
-  ssid: !secret wifi_ssid
-  password: !secret wifi_password
-  fast_connect: true
-
-
-# Example configuration entry
-mqtt:
-  broker: !secret mqtt_broker_1
-  username: !secret mqtt_broker_1_username
-  password: !secret mqtt_broker_1_password
-
-# Example configuration entry
-binary_sensor:
-  - platform: gpio
-    pin:
-      number: D2
-      inverted: true
-      mode:
-        input: true
-        pullup: true
-    id: "Fusstaste_BLAU"
-    internal: true
-    #filters:
-    #  - delayed_on: 10ms
-    #  - delayed_off: 50ms
-    on_multi_click:
-    - timing:
-        - ON for at most 700ms
-        - OFF for at least 50ms
-      then:
-        - mqtt.publish:
-            topic: tabletenniscounter/control/score/count
-            payload: "1"
-            qos: 2
-    - timing:
-        - ON for at least 1s
-      then:
-        - mqtt.publish:
-            topic: tabletenniscounter/control/score/undo
-            payload: ""
-            qos: 2
-  - platform: gpio
-    pin:
-      number: D3
-      inverted: true
-      mode:
-        input: true
-        pullup: true
-    id: "Fusstaste_ROT"
-    internal: true
-    #filters:
-    #  - delayed_on: 10ms
-    #  - delayed_off: 50ms
-    on_multi_click:
-    - timing:
-        - ON for at most 700ms
-        - OFF for at least 50ms
-      then:
-        - mqtt.publish:
-            topic: tabletenniscounter/control/score/count
-            payload: "0"
-            qos: 2
-    - timing:
-        - ON for at least 1s
-      then:
-        - mqtt.publish:
-            topic: tabletenniscounter/control/score/undo
-            payload: ""
-            qos: 2
-
-  
-

secrets.yaml.template

@@ -2,22 +2,9 @@
 wifi_ssid: "WIFI SSID"
 wifi_password: "WIFI PASSWORD"
 
-# Broker 1
-mqtt_broker_1: # Broker 1 IP
-mqtt_broker_1_username: # Broker 1 username
-mqtt_broker_1_password: # Broker 1 password
-
 # Papa Broker
 mqtt_broker_2: # Just put your broker in here...
 
 # A3Pool
 a3poolpasswd: # A3Pool OTA and native API password
 a3poolkey: # Native API encryption KEY
-
-# Table Tennis Footswitches (No ttf encryption but may be added)
-ttfpassword: # A3Pool OTA and native API password
-# ttfkey: # Native API encryption KEY
-
-# Table Tennis ledstrip display
-ttdpassword: # A3Pool OTA and native API password
-ttdkey: # Native API encryption KEY