Added a bunch of information regarding A3Pool and Pingpongfuss to README.md

README.md

@@ -1,7 +1,40 @@
 # The NBS espHome config file collection
 This is a collection of all espHome config files!
 
-# A3Pool
-This is a standard config for the a3pool. Nothing special by far with 2 temp sensors and 2 switches.
+# Some general things:
+## Why tho?
+Why? You ask me why? Because I want everyone in my family to have access to those files.
 
-Better documentation comes later.
+## How about changes?
+The general rule about changes is that you can intruduce them yourself and put in a pull request. However, withhin the family I will try to continue and improve stuff as it is so should you have suggestions, I'd like to hear them
+
+## How about passwords and keys?
+Passwords and keys are listed in (secrets.yaml.temple)[this template]. We do not have a way to share the actual secrets.yaml internally within the family but I hope we find a solution to that problem. For now, ask me and I may share it with you.
+
+# A3Pool
+This is a standard config for the a3pool. Nothing special by far with 2 temp sensors and 1 switch.
+
+The temperature sensors have the `pool_temperature` and `solar_temperature` and will show report the pool temperature and solar temperature respectively every 10 seconds.
+
+There is also one switch that is designed to turn the pump on and off. This works by giving an 500ms long impulse that should turn the pump on/off and sensing on a GPIO ping whenever the pump is currently on/off. This switch carries the name of `pump`. I know HOW CREATIVE...
+**HOWEVER: If the pump is set to off or to the physical clock with physical switch in the garage this will not work!** It will still report it's state correclty however.
+
+There is an other switch that does not have any functionality yet but it's `automate_control` if anyone wants to know.
+
+
+# Table Tennis Count!
+## Table Tennis Footswitch
+The files go by the name of (pingpongfuss.yaml)[pingpongfuss1.yaml].
+While the 1 may be interpreted as just the first of the two sides, it's actually just one nodemcu for both sides. So keep that in mind.
+
+And other disclaimer: **This does not use the native API, or an encryption key, and uses MQTT only. However, that might change in the future**
+
+The topics are as follows:
+
+### Scoring points
+Topic `tabletenniscounter/control/score/count` will be send with the value of either `0` or `1` when ever red or blue should get a point respectively.
+
+### Undoing last points (Up to 10 points)
+Topic `tabletenniscounter/control/score/undo` will be sent with no payload to worry about. The counting part on the respberry pi is supposed to keep a list of the last 10 points.
+
+More infos are added soon!

pingpongfuss1.yaml

@@ -0,0 +1,90 @@
+esphome:
+  name: pingfuss1
+  platform: ESP8266
+  board: nodemcuv2
+
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+# DISABLED - We currently do not need it for operation. Maybe someday
+
+# api:
+#  password: !secret ttfpassword
+
+ota:
+  password: !secret ttfpassword
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+  fast_connect: true
+
+
+# Example configuration entry
+mqtt:
+  broker: !secret mqtt_broker_1
+  username: !secret mqtt_broker_1_username
+  password: !secret mqtt_broker_1_password
+
+# Example configuration entry
+binary_sensor:
+  - platform: gpio
+    pin:
+      number: D2
+      inverted: true
+      mode:
+        input: true
+        pullup: true
+    id: "Fusstaste_BLAU"
+    internal: true
+    #filters:
+    #  - delayed_on: 10ms
+    #  - delayed_off: 50ms
+    on_multi_click:
+    - timing:
+        - ON for at most 700ms
+        - OFF for at least 50ms
+      then:
+        - mqtt.publish:
+            topic: tabletenniscounter/control/score/count
+            payload: "1"
+            qos: 2
+    - timing:
+        - ON for at least 1s
+      then:
+        - mqtt.publish:
+            topic: tabletenniscounter/control/score/undo
+            payload: ""
+            qos: 2
+  - platform: gpio
+    pin:
+      number: D3
+      inverted: true
+      mode:
+        input: true
+        pullup: true
+    id: "Fusstaste_ROT"
+    internal: true
+    #filters:
+    #  - delayed_on: 10ms
+    #  - delayed_off: 50ms
+    on_multi_click:
+    - timing:
+        - ON for at most 700ms
+        - OFF for at least 50ms
+      then:
+        - mqtt.publish:
+            topic: tabletenniscounter/control/score/count
+            payload: "0"
+            qos: 2
+    - timing:
+        - ON for at least 1s
+      then:
+        - mqtt.publish:
+            topic: tabletenniscounter/control/score/undo
+            payload: ""
+            qos: 2
+
+  
+

secrets.yaml.template

@@ -2,9 +2,22 @@
 wifi_ssid: "WIFI SSID"
 wifi_password: "WIFI PASSWORD"
 
+# Broker 1
+mqtt_broker_1: # Broker 1 IP
+mqtt_broker_1_username: # Broker 1 username
+mqtt_broker_1_password: # Broker 1 password
+
 # Papa Broker
 mqtt_broker_2: # Just put your broker in here...
 
 # A3Pool
 a3poolpasswd: # A3Pool OTA and native API password
 a3poolkey: # Native API encryption KEY
+
+# Table Tennis Footswitches (No ttf encryption but may be added)
+ttfpassword: # A3Pool OTA and native API password
+# ttfkey: # Native API encryption KEY
+
+# Table Tennis ledstrip display
+ttdpassword: # A3Pool OTA and native API password
+ttdkey: # Native API encryption KEY