uint8_t getFingerprintEnroll(int id) {
  lcd.setCursor(0, 1);
  lcd.print("Fin pls");

  int p = -1;
  while (p != FINGERPRINT_OK) {
    p = finger.getImage();
    switch (p) {
      case FINGERPRINT_OK:
        if(debug)Serial.println("Image taken");
        lcd.clear();
        lcd.print("Image 1");
        lcd.setCursor(0, 1);
        lcd.print("Done");
        break;
      case FINGERPRINT_NOFINGER:
        if(debug)Serial.println(".");
        break;
      case FINGERPRINT_PACKETRECIEVEERR:
        if(debug)Serial.println("Communication error");
        lcd.clear();
        lcd.print("Error");
        break;
      case FINGERPRINT_IMAGEFAIL:
        if(debug)Serial.println("Imaging error");
        lcd.clear();
        lcd.print("Error");
        break;
      default:
        if(debug)Serial.println("Unknown error");
        lcd.clear();
        lcd.print("Error");
        break;
    }
  }

  // OK success!

  p = finger.image2Tz(1);
  switch (p) {
    case FINGERPRINT_OK:
      if(debug)Serial.println("Image converted");
      break;
    case FINGERPRINT_IMAGEMESS:
      if(debug)Serial.println("Image too messy");
      return p;
    case FINGERPRINT_PACKETRECIEVEERR:
      if(debug)Serial.println("Communication error");
      return p;
    case FINGERPRINT_FEATUREFAIL:
      if(debug)Serial.println("Could not find fingerprint features");
      return p;
    case FINGERPRINT_INVALIDIMAGE:
      if(debug)Serial.println("Could not find fingerprint features");
      return p;
    default:
      if(debug)Serial.println("Unknown error");
      return p;
  }

  //if(debug)Serial.println("Remove finger");
  lcd.clear();
  lcd.print("Remove");
  lcd.setCursor(0, 1);
  lcd.print("Finger");
  delay(2000);
  p = 0;
  while (p != FINGERPRINT_NOFINGER) {
    p = finger.getImage();
  }

  p = -1;
  lcd.clear();
  lcd.print("Second");
  lcd.setCursor(0, 1);
  lcd.print("time pls");
  if(debug)Serial.println("Place same finger again");
  while (p != FINGERPRINT_OK) {
    p = finger.getImage();
    switch (p) {
      case FINGERPRINT_OK:
        if(debug)Serial.println("Image taken");
        break;
      case FINGERPRINT_NOFINGER:
        if(debug)Serial.print(".");
        break;
      case FINGERPRINT_PACKETRECIEVEERR:
        if(debug)Serial.println("Communication error");
        lcd.clear();
        lcd.print("Error");
        break;
      case FINGERPRINT_IMAGEFAIL:
        if(debug)Serial.println("Imaging error");
        lcd.clear();
        lcd.print("Error");
        break;
      default:
        if(debug)Serial.println("Unknown error");
        lcd.clear();
        lcd.print("Error");
        break;
    }
  }

  // OK success!

  p = finger.image2Tz(2);
  switch (p) {
    case FINGERPRINT_OK:
      if(debug)Serial.println("Image converted");
      break;
    case FINGERPRINT_IMAGEMESS:
      if(debug)Serial.println("Image too messy");
      return p;
    case FINGERPRINT_PACKETRECIEVEERR:
      if(debug)Serial.println("Communication error");
      lcd.clear();
      lcd.print("Error");
      return p;
    case FINGERPRINT_FEATUREFAIL:
      if(debug)Serial.println("Could not find fingerprint features");
      lcd.clear();
      lcd.print("Error");
      return p;
    case FINGERPRINT_INVALIDIMAGE:
      if(debug)Serial.println("Could not find fingerprint features");
      lcd.clear();
      lcd.print("Error");
      return p;
    default:
      if(debug)Serial.println("Unknown error");
      lcd.clear();
      lcd.print("Error");
      return p;
  }


  // OK converted!
  p = finger.createModel();
  if (p == FINGERPRINT_OK) {
    if(debug)Serial.println("Prints matched!");
    lcd.clear();
    lcd.print("Match!");
  } else if (p == FINGERPRINT_PACKETRECIEVEERR) {
    if(debug)Serial.println("Communication error");
    return p;
  } else if (p == FINGERPRINT_ENROLLMISMATCH) {
    if(debug)Serial.println("Fingerprints did not match");
    lcd.clear();
    lcd.print("Error");
    lcd.setCursor(0, 1);
    lcd.print("mismatch");
    delay(1000);
    return p;
  } else {
    if(debug)Serial.println("Unknown error");
    return p;
  }

  if(debug)Serial.print("ID "); if(debug)Serial.println(id);
  p = finger.storeModel(id);
  if (p == FINGERPRINT_OK) {
    if(debug)Serial.println("Stored!");
  } else if (p == FINGERPRINT_PACKETRECIEVEERR) {
    if(debug)Serial.println("Communication error");
    return p;
  } else if (p == FINGERPRINT_BADLOCATION) {
    if(debug)Serial.println("Could not store in that location");
    return p;
  } else if (p == FINGERPRINT_FLASHERR) {
    if(debug)Serial.println("Error writing to flash");
    return p;
  } else {
    if(debug)Serial.println("Unknown error");
    return p;
  }
  return 0;
}


void getRFIDEnroll() {
  Serial1.flush();
  if (Serial1.available() >=  gesamtKennungLaenge) // wenn genug Zeichen eingegangen ...
  {
    if (Serial1.read() == startZeichen) // und das Startzeichen erkannt wurde ...
    {
      //if(debug)Serial.print("Start-Byte erkannt ... ");
      bytesGelesen = 0; // starten Lesen, also Zaehler auf 0
      while (bytesGelesen < kennungLaenge) // lese 12-stelligen Code
      {
        char zeichen = Serial1.read(); // lesen Zeichen
        //if(debug)Serial.print(zeichen); // zur Kontrolle
        //if(debug)Serial.print(" ");
        if (zeichen == endeZeichen) // suche nach Ende-Befehl
        {
          //if(debug)Serial.println("CR erkannt ...");
          break;
        }
        code[bytesGelesen] = zeichen; // speicher Zeichen im Puffer
        bytesGelesen = bytesGelesen + 1; // ein Zeichen weiter
      }
      code[bytesGelesen] = 0; // beende Zeichenkette
      if(debug)Serial.print("RFID-Code lautet: ");
      if(debug)Serial.println(code);
      zugang = code; //char[] to string

      //already existing
      if (getRFIDIndex(code) != -1) {
        if(debug)Serial.print("Error: ");
        if(debug)Serial.print("This is ");
        if(debug)Serial.println(persons[getRFIDIndex(code)].name);
        lcd.setCursor(0, 1);
        lcd.print("Error!  ");

        zugang = ""; //this time reset first!
        delay(1000); // debounce time
        serial1_flush_buffer();
      }
      else {
        // do not reset zugang
        delay(1000); // debounce time
        serial1_flush_buffer();
      }



    }
  }

}



int write_pers_file(Person* thisPerson) {
  if(debug)Serial.println("Writing Person:");
  File write;
  char tmp[25];

  int i = 0;
  //if(debug)Serial.println(thisPerson.file_name);
  write = SD.open(thisPerson->file_name, FILE_WRITE);

// write.seek(0);


  sprintf(tmp, "%s\n", thisPerson->name);
  if(debug)Serial.print(tmp);
  write.write(tmp, strlen(tmp));
  sprintf(tmp, "rfid_uuid: %s\n", thisPerson->rfid_uuid);
  if(debug)Serial.print(tmp);
  write.write(tmp, strlen(tmp));
  sprintf(tmp, "finger_uuid: %u\n", thisPerson->finger_uuid);
  if(debug)Serial.print(tmp);
  write.write(tmp, strlen(tmp));
  sprintf(tmp, "credits_left: %u\n", thisPerson->credits_left);
  write.write(tmp, strlen(tmp));

  for (i = 0; i < drinksMax; i++) {
    if (thisPerson->drinks_taken[i] != -1) {
      sprintf(tmp, "\ndrink_Count_%d: %d\n", i, thisPerson->drinks_taken[i]);
      write.write(tmp, strlen(tmp));
      if(debug)Serial.println(tmp);
    }
  }


  write.close();

  //rescan it!
 delete [] persons;  // When done, free memory pointed to
 persons = NULL;
  persons = readAllPersons();
  if(debug)Serial.println(sizeof(persons));
  return 0;

}