From bed40878863c28a7acc453339628aed3bbc708de Mon Sep 17 00:00:00 2001 From: Lukas Bachschwell Date: Mon, 4 Jul 2016 15:37:55 +0200 Subject: [PATCH] added debug enable for serial output --- beerbox.ino | 78 ++++++++++++++++++++-------------------- enroll.ino | 100 ++++++++++++++++++++++++++-------------------------- inputs.ino | 28 +++++++-------- 3 files changed, 103 insertions(+), 103 deletions(-) diff --git a/beerbox.ino b/beerbox.ino index 592956d..957ef0f 100644 --- a/beerbox.ino +++ b/beerbox.ino @@ -12,7 +12,7 @@ Adafruit_Fingerprint finger = Adafruit_Fingerprint(&Serial2); LiquidCrystal_I2C lcd(0x38, 8, 2); // 0x38 for PCF***A on address 000 - +#define debug 0 //General debug out on/off File myFile; const int chipSelect = 53; @@ -52,9 +52,9 @@ void setup() { //Fingerprint init finger.begin(57600); if (finger.verifyPassword()) { - Serial.println("Found fingerprint sensor!"); + if(debug)Serial.println("Found fingerprint sensor!"); } else { - Serial.println("Did not find fingerprint sensor :("); + if(debug)Serial.println("Did not find fingerprint sensor :("); while (1); } @@ -65,7 +65,7 @@ void setup() { Serial3.begin(115200); - Serial.print("Initializing SD card..."); + if(debug)Serial.print("Initializing SD card..."); // On the Ethernet Shield, CS is pin 4. It's set as an output by default. // Note that even if it's not used as the CS pin, the hardware SS pin // (10 on most Arduino boards, 53 on the Mega) must be left as an output @@ -73,10 +73,10 @@ void setup() { pinMode(SS, OUTPUT); if (!SD.begin(chipSelect)) { - Serial.println("initialization failed!"); + if(debug)Serial.println("initialization failed!"); return; } - Serial.println("initialization done."); + if(debug)Serial.println("initialization done."); //check_for_file("p001", "per"); @@ -120,10 +120,10 @@ void loop() { personName = String(personName + incomingByte); incomingByte = Serial3.read(); } - Serial.println(personName); + if(debug)Serial.println(personName); lcd.clear(); lcd.print(personName); - Serial.println(maxID); + if(debug)Serial.println(maxID); //lcd.setCursor(0,1); //lcd.print("Fin pls"); int fingerReturn = -1; @@ -140,7 +140,7 @@ void loop() { while (zugang == "") { getRFIDEnroll(); } - Serial.println(zugang); + if(debug)Serial.println(zugang); maxID++; Person* newPerson = new Person; personName.toCharArray(newPerson->name, personName.length()+1); @@ -182,10 +182,10 @@ void check_for_file(String filename, String extension) { str.toCharArray(buf, str.length() + 1); if (SD.exists("p001.per")) { - Serial.println(str + " exists."); + if(debug)Serial.println(str + " exists."); } else { - Serial.println(str + " doesn't exist."); + if(debug)Serial.println(str + " doesn't exist."); } } @@ -207,8 +207,8 @@ Beerbox* read_beerbox(Beerbox *box) { read = SD.open("bb.con", FILE_READ); if (read == false) { - Serial.print("error while reading!\n"); - Serial.print("-ABORT!\n\n"); + if(debug)Serial.print("error while reading!\n"); + if(debug)Serial.print("-ABORT!\n\n"); while (1); } @@ -234,13 +234,13 @@ Beerbox* read_beerbox(Beerbox *box) { for (i = 0; (i < NUM_OF_DRINKS) && (box->drinks[i].price != -1); i++) { sprintf(toprint, "drink number %i: %s\nprice: %d\n", i , box->drinks[i].name, box->drinks[i].price); - Serial.println(toprint); + if(debug)Serial.println(toprint); } if (i < NUM_OF_DRINKS) { sprintf(toprint, "Slots %d - %d are not in use!\n", i + 1, NUM_OF_DRINKS); drinksMax = i; - Serial.println(toprint); + if(debug)Serial.println(toprint); } read.close(); @@ -257,13 +257,13 @@ Person read_person(Beerbox *box, char *filename) { //giving the full filename here, since it makes stuff easier - //Serial.print("The filename is: "); - //Serial.println(filename); + //if(debug)Serial.print("The filename is: "); + //if(debug)Serial.println(filename); read = SD.open(filename, FILE_READ); if (read == false) { - Serial.print("error while reading!\n"); - Serial.print("ABORT!\n\n"); + if(debug)Serial.print("error while reading!\n"); + if(debug)Serial.print("ABORT!\n\n"); while (-1); } @@ -283,24 +283,24 @@ Person read_person(Beerbox *box, char *filename) { memset(aperson.rfid_uuid, 0, 13); read_line_from_file(read, tmp, sizeof(tmp)); sscanf(tmp, "rfid_uuid: %12s", &aperson.rfid_uuid); - Serial.println(aperson.rfid_uuid); + if(debug)Serial.println(aperson.rfid_uuid); read_line_from_file(read, tmp, sizeof(tmp)); sscanf(tmp, "finger_uuid: %d", &aperson.finger_uuid); - //Serial.println(aperson.finger_uuid); + //if(debug)Serial.println(aperson.finger_uuid); //credits_left read_line_from_file(read, tmp, sizeof(tmp)); sscanf(tmp, "credits_left: %d", &aperson.credits_left); - //Serial.println(aperson.credits_left); + //if(debug)Serial.println(aperson.credits_left); while (read_line_from_file(read, tmp, sizeof(tmp)), strlen(tmp) > 0) { int tmpCount = 0; int tmpDrink = 0; sscanf(tmp, "drink_Count_%d: %d", &tmpDrink, &tmpCount); if (strlen(tmp)) { - //Serial.print("drink: "); - //Serial.print(tmpDrink); - //Serial.print(" count: "); - //Serial.println(tmpCount); + //if(debug)Serial.print("drink: "); + //if(debug)Serial.print(tmpDrink); + //if(debug)Serial.print(" count: "); + //if(debug)Serial.println(tmpCount); aperson.drinks_taken[tmpDrink] = tmpCount; } } @@ -323,9 +323,9 @@ void print_person(Beerbox *box, Person *aperson) { Serial.write(toprint); sprintf(toprint, "finger_uuid: %u\n", aperson->finger_uuid); if (aperson->finger_uuid > maxID) maxID = aperson->finger_uuid; - Serial.print(toprint); + if(debug)Serial.print(toprint); sprintf(toprint, "credits_left: %u\n", aperson->credits_left); - Serial.print(toprint); + if(debug)Serial.print(toprint); for (i = 0; i < drinksMax; i++) { @@ -350,12 +350,12 @@ int update_pers_file() { char tmp[25]; int i = 0; - //Serial.println(thisPerson.file_name); + //if(debug)Serial.println(thisPerson.file_name); write = SD.open(thisPerson.file_name, FILE_WRITE); if (write == NULL) { - Serial.print("error while reading!\n"); - Serial.print("ABORT!\n\n"); + if(debug)Serial.print("error while reading!\n"); + if(debug)Serial.print("ABORT!\n\n"); while (-1); } write.seek(0); @@ -375,7 +375,7 @@ int update_pers_file() { if (thisPerson.drinks_taken[i] != -1) { sprintf(tmp, "\ndrink_Count_%d: %d\n", i, thisPerson.drinks_taken[i]); write.write(tmp, strlen(tmp)); - Serial.println(tmp); + if(debug)Serial.println(tmp); } } @@ -397,7 +397,7 @@ char* read_from_file_until(File stream, char *str, int max_len, char until) { for (i = 0; (tmp_int != until) && (i < (max_len - 1)) && (tmp_int != -1); i++) { tmp_int = stream.read(); - //Serial.print("%c", tmp_int); + //if(debug)Serial.print("%c", tmp_int); str[i] = tmp_int; } @@ -405,7 +405,7 @@ char* read_from_file_until(File stream, char *str, int max_len, char until) { if (tmp_int == -1) { //May occur more often as the function tries to read a certain number of drinks. - //Serial.print("END OF FILE REACHED!\nABORT!!\n\n"); + //if(debug)Serial.print("END OF FILE REACHED!\nABORT!!\n\n"); str[0] = 0; return str; @@ -452,8 +452,8 @@ Person* readAllPersons () { entry.close(); } //now store them - //Serial.print("count:"); - //Serial.print(personCount); + //if(debug)Serial.print("count:"); + //if(debug)Serial.print(personCount); Person* readPersons = new Person[personCount]; int counter = 0; dir.rewindDirectory(); @@ -467,8 +467,8 @@ Person* readAllPersons () { if (strstr(strlwr(entry.name() + (len - 4)), ".per")) { //Yeah it is a person! - //Serial.print("Person: "); - //Serial.println(entry.name()); + //if(debug)Serial.print("Person: "); + //if(debug)Serial.println(entry.name()); Person thisPerson = read_person(box, entry.name()); readPersons[counter] = thisPerson; counter++; @@ -477,7 +477,7 @@ Person* readAllPersons () { entry.close(); } dir.close(); - Serial.println("Read all!"); + if(debug)Serial.println("Read all!"); return readPersons; } diff --git a/enroll.ino b/enroll.ino index b41fe1e..e0294b6 100644 --- a/enroll.ino +++ b/enroll.ino @@ -7,27 +7,27 @@ uint8_t getFingerprintEnroll(int id) { p = finger.getImage(); switch (p) { case FINGERPRINT_OK: - Serial.println("Image taken"); + if(debug)Serial.println("Image taken"); lcd.clear(); lcd.print("Image 1"); lcd.setCursor(0, 1); lcd.print("Done"); break; case FINGERPRINT_NOFINGER: - Serial.println("."); + if(debug)Serial.println("."); break; case FINGERPRINT_PACKETRECIEVEERR: - Serial.println("Communication error"); + if(debug)Serial.println("Communication error"); lcd.clear(); lcd.print("Error"); break; case FINGERPRINT_IMAGEFAIL: - Serial.println("Imaging error"); + if(debug)Serial.println("Imaging error"); lcd.clear(); lcd.print("Error"); break; default: - Serial.println("Unknown error"); + if(debug)Serial.println("Unknown error"); lcd.clear(); lcd.print("Error"); break; @@ -39,26 +39,26 @@ uint8_t getFingerprintEnroll(int id) { p = finger.image2Tz(1); switch (p) { case FINGERPRINT_OK: - Serial.println("Image converted"); + if(debug)Serial.println("Image converted"); break; case FINGERPRINT_IMAGEMESS: - Serial.println("Image too messy"); + if(debug)Serial.println("Image too messy"); return p; case FINGERPRINT_PACKETRECIEVEERR: - Serial.println("Communication error"); + if(debug)Serial.println("Communication error"); return p; case FINGERPRINT_FEATUREFAIL: - Serial.println("Could not find fingerprint features"); + if(debug)Serial.println("Could not find fingerprint features"); return p; case FINGERPRINT_INVALIDIMAGE: - Serial.println("Could not find fingerprint features"); + if(debug)Serial.println("Could not find fingerprint features"); return p; default: - Serial.println("Unknown error"); + if(debug)Serial.println("Unknown error"); return p; } - //Serial.println("Remove finger"); + //if(debug)Serial.println("Remove finger"); lcd.clear(); lcd.print("Remove"); lcd.setCursor(0, 1); @@ -74,28 +74,28 @@ uint8_t getFingerprintEnroll(int id) { lcd.print("Second"); lcd.setCursor(0, 1); lcd.print("time pls"); - Serial.println("Place same finger again"); + if(debug)Serial.println("Place same finger again"); while (p != FINGERPRINT_OK) { p = finger.getImage(); switch (p) { case FINGERPRINT_OK: - Serial.println("Image taken"); + if(debug)Serial.println("Image taken"); break; case FINGERPRINT_NOFINGER: - Serial.print("."); + if(debug)Serial.print("."); break; case FINGERPRINT_PACKETRECIEVEERR: - Serial.println("Communication error"); + if(debug)Serial.println("Communication error"); lcd.clear(); lcd.print("Error"); break; case FINGERPRINT_IMAGEFAIL: - Serial.println("Imaging error"); + if(debug)Serial.println("Imaging error"); lcd.clear(); lcd.print("Error"); break; default: - Serial.println("Unknown error"); + if(debug)Serial.println("Unknown error"); lcd.clear(); lcd.print("Error"); break; @@ -107,28 +107,28 @@ uint8_t getFingerprintEnroll(int id) { p = finger.image2Tz(2); switch (p) { case FINGERPRINT_OK: - Serial.println("Image converted"); + if(debug)Serial.println("Image converted"); break; case FINGERPRINT_IMAGEMESS: - Serial.println("Image too messy"); + if(debug)Serial.println("Image too messy"); return p; case FINGERPRINT_PACKETRECIEVEERR: - Serial.println("Communication error"); + if(debug)Serial.println("Communication error"); lcd.clear(); lcd.print("Error"); return p; case FINGERPRINT_FEATUREFAIL: - Serial.println("Could not find fingerprint features"); + if(debug)Serial.println("Could not find fingerprint features"); lcd.clear(); lcd.print("Error"); return p; case FINGERPRINT_INVALIDIMAGE: - Serial.println("Could not find fingerprint features"); + if(debug)Serial.println("Could not find fingerprint features"); lcd.clear(); lcd.print("Error"); return p; default: - Serial.println("Unknown error"); + if(debug)Serial.println("Unknown error"); lcd.clear(); lcd.print("Error"); return p; @@ -138,14 +138,14 @@ uint8_t getFingerprintEnroll(int id) { // OK converted! p = finger.createModel(); if (p == FINGERPRINT_OK) { - Serial.println("Prints matched!"); + if(debug)Serial.println("Prints matched!"); lcd.clear(); lcd.print("Match!"); } else if (p == FINGERPRINT_PACKETRECIEVEERR) { - Serial.println("Communication error"); + if(debug)Serial.println("Communication error"); return p; } else if (p == FINGERPRINT_ENROLLMISMATCH) { - Serial.println("Fingerprints did not match"); + if(debug)Serial.println("Fingerprints did not match"); lcd.clear(); lcd.print("Error"); lcd.setCursor(0, 1); @@ -153,25 +153,25 @@ uint8_t getFingerprintEnroll(int id) { delay(1000); return p; } else { - Serial.println("Unknown error"); + if(debug)Serial.println("Unknown error"); return p; } - Serial.print("ID "); Serial.println(id); + if(debug)Serial.print("ID "); if(debug)Serial.println(id); p = finger.storeModel(id); if (p == FINGERPRINT_OK) { - Serial.println("Stored!"); + if(debug)Serial.println("Stored!"); } else if (p == FINGERPRINT_PACKETRECIEVEERR) { - Serial.println("Communication error"); + if(debug)Serial.println("Communication error"); return p; } else if (p == FINGERPRINT_BADLOCATION) { - Serial.println("Could not store in that location"); + if(debug)Serial.println("Could not store in that location"); return p; } else if (p == FINGERPRINT_FLASHERR) { - Serial.println("Error writing to flash"); + if(debug)Serial.println("Error writing to flash"); return p; } else { - Serial.println("Unknown error"); + if(debug)Serial.println("Unknown error"); return p; } return 0; @@ -184,31 +184,31 @@ void getRFIDEnroll() { { if (Serial1.read() == startZeichen) // und das Startzeichen erkannt wurde ... { - //Serial.print("Start-Byte erkannt ... "); + //if(debug)Serial.print("Start-Byte erkannt ... "); bytesGelesen = 0; // starten Lesen, also Zaehler auf 0 while (bytesGelesen < kennungLaenge) // lese 12-stelligen Code { char zeichen = Serial1.read(); // lesen Zeichen - //Serial.print(zeichen); // zur Kontrolle - //Serial.print(" "); + //if(debug)Serial.print(zeichen); // zur Kontrolle + //if(debug)Serial.print(" "); if (zeichen == endeZeichen) // suche nach Ende-Befehl { - //Serial.println("CR erkannt ..."); + //if(debug)Serial.println("CR erkannt ..."); break; } code[bytesGelesen] = zeichen; // speicher Zeichen im Puffer bytesGelesen = bytesGelesen + 1; // ein Zeichen weiter } code[bytesGelesen] = 0; // beende Zeichenkette - Serial.print("RFID-Code lautet: "); - Serial.println(code); + if(debug)Serial.print("RFID-Code lautet: "); + if(debug)Serial.println(code); zugang = code; //char[] to string //already existing if (getRFIDIndex(code) != -1) { - Serial.print("Error: "); - Serial.print("This is "); - Serial.println(persons[getRFIDIndex(code)].name); + if(debug)Serial.print("Error: "); + if(debug)Serial.print("This is "); + if(debug)Serial.println(persons[getRFIDIndex(code)].name); lcd.setCursor(0, 1); lcd.print("Error! "); @@ -232,25 +232,25 @@ void getRFIDEnroll() { int write_pers_file(Person* thisPerson) { - Serial.println("Writing Person:"); + if(debug)Serial.println("Writing Person:"); File write; char tmp[25]; int i = 0; - //Serial.println(thisPerson.file_name); + //if(debug)Serial.println(thisPerson.file_name); write = SD.open(thisPerson->file_name, FILE_WRITE); // write.seek(0); sprintf(tmp, "%s\n", thisPerson->name); - Serial.print(tmp); + if(debug)Serial.print(tmp); write.write(tmp, strlen(tmp)); sprintf(tmp, "rfid_uuid: %s\n", thisPerson->rfid_uuid); - Serial.print(tmp); + if(debug)Serial.print(tmp); write.write(tmp, strlen(tmp)); sprintf(tmp, "finger_uuid: %u\n", thisPerson->finger_uuid); - Serial.print(tmp); + if(debug)Serial.print(tmp); write.write(tmp, strlen(tmp)); sprintf(tmp, "credits_left: %u\n", thisPerson->credits_left); write.write(tmp, strlen(tmp)); @@ -259,7 +259,7 @@ int write_pers_file(Person* thisPerson) { if (thisPerson->drinks_taken[i] != -1) { sprintf(tmp, "\ndrink_Count_%d: %d\n", i, thisPerson->drinks_taken[i]); write.write(tmp, strlen(tmp)); - Serial.println(tmp); + if(debug)Serial.println(tmp); } } @@ -270,7 +270,7 @@ int write_pers_file(Person* thisPerson) { delete [] persons; // When done, free memory pointed to persons = NULL; persons = readAllPersons(); - Serial.println(sizeof(persons)); + if(debug)Serial.println(sizeof(persons)); return 0; } diff --git a/inputs.ino b/inputs.ino index a718155..334b0cb 100644 --- a/inputs.ino +++ b/inputs.ino @@ -13,7 +13,7 @@ void checkButton() { if (box->waiting == 0) { if (currentDrink == drinksMax - 1) currentDrink = -1; currentDrink++; - Serial.println(box->drinks[currentDrink].name); + if(debug)Serial.println(box->drinks[currentDrink].name); lcd.clear(); lcd.print("Drink:"); lcd.setCursor(0, 1); @@ -58,14 +58,14 @@ bool checkFinger() { if (p != FINGERPRINT_OK) return -1; // found a match! - // Serial.print("Found ID #"); Serial.print(finger.fingerID); - // Serial.print(" with confidence of "); Serial.println(finger.confidence); + // if(debug)Serial.print("Found ID #"); if(debug)Serial.print(finger.fingerID); + // if(debug)Serial.print(" with confidence of "); if(debug)Serial.println(finger.confidence); //ok now check which person that is! if (getFingerIndex(finger.fingerID) != -1) { - Serial.print("This is "); - Serial.println(persons[getFingerIndex(finger.fingerID)].name); + if(debug)Serial.print("This is "); + if(debug)Serial.println(persons[getFingerIndex(finger.fingerID)].name); countUp(getFingerIndex(finger.fingerID), 0);//for finger context } } @@ -76,33 +76,33 @@ void checkRFID() { { if (Serial1.read() == startZeichen) // und das Startzeichen erkannt wurde ... { - //Serial.print("Start-Byte erkannt ... "); + //if(debug)Serial.print("Start-Byte erkannt ... "); bytesGelesen = 0; // starten Lesen, also Zaehler auf 0 while (bytesGelesen < kennungLaenge) // lese 12-stelligen Code { char zeichen = Serial1.read(); // lesen Zeichen - //Serial.print(zeichen); // zur Kontrolle - //Serial.print(" "); + //if(debug)Serial.print(zeichen); // zur Kontrolle + //if(debug)Serial.print(" "); if (zeichen == endeZeichen) // suche nach Ende-Befehl { - //Serial.println("CR erkannt ..."); + //if(debug)Serial.println("CR erkannt ..."); break; } code[bytesGelesen] = zeichen; // speicher Zeichen im Puffer bytesGelesen = bytesGelesen + 1; // ein Zeichen weiter } code[bytesGelesen] = 0; // beende Zeichenkette - Serial.print("RFID-Code lautet: "); - Serial.println(code); + if(debug)Serial.print("RFID-Code lautet: "); + if(debug)Serial.println(code); digitalWrite(led,HIGH); ledTime = millis(); - //Serial.print("This is "); - //Serial.println(persons[getRFIDIndex(persons, code)].name); + //if(debug)Serial.print("This is "); + //if(debug)Serial.println(persons[getRFIDIndex(persons, code)].name); if(getRFIDIndex( code)!=-1) countUp(getRFIDIndex( code), 1); // 1 for rfid context else - Serial.println("Error: Nonexisting Card"); + if(debug)Serial.println("Error: Nonexisting Card"); zugang = ""; delay(1000); // debounce time