Adding pages, moving values back and forth and displaying, fixed voltage display

src/receiver.cpp

@@ -35,7 +35,9 @@ float speed = 0;
 uint8_t sendTemperature = 0;
 uint8_t sendTemperatureDecimals = 0;
 uint8_t sendVoltage = 0;
-uint8_t sendSpeed = 0;
+uint8_t sendVoltageDecimals = 0;
+uint8_t sendRPMupper = 1;
+uint8_t sendRPMlower = 2;
 
 //#define pairingMode
 #define CONNECTION_TIMEOUT 300
@@ -71,7 +73,8 @@ void OnDataRecv(const uint8_t *mac_addr, const uint8_t *data, int data_len) {
   Serial.print("Last Packet Recv Data: "); Serial.println(recData[0]); Serial.print(" "); Serial.print(recData[1]); Serial.print(" len:");  Serial.println(data_len);
 
 // Answer with response
-  const uint8_t respData[] = { sendTemperature, sendTemperatureDecimals, sendVoltage }; // sendSpeed
+
+  const uint8_t respData[] = { sendVoltage, sendVoltageDecimals, sendTemperature, sendTemperatureDecimals, sendRPMupper, sendRPMlower };
   Serial.print("Sending RESPONSE.... ");
   esp_err_t result = esp_now_send(mac_addr, respData, sizeof(data));
   if (result == ESP_OK) {
@@ -187,8 +190,8 @@ void checkTemperature() {
   Serial.println(temperature);
   if(temperature < 35) digitalWrite(fanRelais, LOW);
   if(temperature > 40) digitalWrite(fanRelais, HIGH);
-  sendTemperature = (uint16_t) temperature;
+  sendTemperature = abs(floor(temperature));
-  sendTemperatureDecimals = (uint16_t)(temperature - sendTemperature) *100;
+  sendTemperatureDecimals = (temperature - sendTemperature) * 100;
 }
 
 void setup() {

src/remote.cpp

@@ -11,12 +11,24 @@
 
 #include "accel.h"
 
+#define B_VOLT    0
+#define B_VOLT_D  1
+#define B_TEMP    2
+#define B_TEMP_D  3
+#define B_SPEED   4
+#define B_SPEED_D 5
+
+uint8_t boardData[6] = {0, 0, 0, 0, 0, 0};
+
+bool connected = false;
+
 // Defining variables for OLED display
-U8G2_SSD1306_128X64_NONAME_F_SW_I2C u8g2(U8G2_R2, /* clock=*/ 15, /* data=*/ 4, /* reset=*/ 16);
+U8G2_SSD1306_128X64_NONAME_F_SW_I2C u8g2 (U8G2_R2, /* clock=*/ 15, /* data=*/ 4, /* reset=*/ 16);
 char displayBuffer[20];
 String displayString;
 short displayData = 0;
 unsigned long lastSignalBlink;
+bool signalBlink = false;
 unsigned long lastDataRotation;
 
 // Defining variables for Settings menu
@@ -36,9 +48,12 @@ byte hallCenterMargin = 5;
 byte currentSetting = 0;
 const byte numOfSettings = 11;
 
-const float minVoltage = 3.2;
+const float minVoltage = 3.25;
 const float maxVoltage = 4.1;
 const float refVoltage = 3.3;
+// Resistors in Ohms
+const float deviderR1 = 1500;
+const float deviderR2 = 22000;
 
 
 // Global copy of board
@@ -61,17 +76,8 @@ esp_now_peer_info_t board;
 // ESPNOW functions ##############################
 // Scan for boards in AP mode
 
-void configDeviceAP(bool hidden) {
-  bool result = WiFi.softAP("ESK8Remote", "ESK8_Password+vD8z2YAvoDBW?Zx", CHANNEL, hidden);
-  if (!result) {
-    Serial.println("AP Config failed.");
-  } else {
-    Serial.println("AP Config Success. Broadcasting with AP: " + String("ESK8"));
-  }
-}
-
 #ifdef pairingMode
-void ScanForboard() {
+void ScanForBoard() {
   int8_t scanResults = WiFi.scanNetworks();
   // reset on each scan
   bool boardFound = 0;
@@ -241,7 +247,14 @@ void OnDataSent(const uint8_t *mac_addr, esp_now_send_status_t status) {
   snprintf(macStr, sizeof(macStr), "%02x:%02x:%02x:%02x:%02x:%02x",
            mac_addr[0], mac_addr[1], mac_addr[2], mac_addr[3], mac_addr[4], mac_addr[5]);
   Serial.print("Last Packet Sent to: "); Serial.println(macStr);
-  Serial.print("Last Packet Send Status: "); Serial.println(status == ESP_NOW_SEND_SUCCESS ? "Delivery Success" : "Delivery Fail");
+  Serial.print("Last Packet Send Status: ");
+  if(status == ESP_NOW_SEND_SUCCESS) {
+    connected = true;
+    Serial.println("Delivery Success");
+  } else {
+    connected = false;
+    Serial.println("Delivery Fail");
+  }
 }
 
 // callback when data is recv from board
@@ -249,10 +262,10 @@ void OnDataRecv(const uint8_t *mac_addr, const uint8_t *data, int data_len) {
   char macStr[18];
   snprintf(macStr, sizeof(macStr), "%02x:%02x:%02x:%02x:%02x:%02x",
            mac_addr[0], mac_addr[1], mac_addr[2], mac_addr[3], mac_addr[4], mac_addr[5]);
-  Serial.print("#######################Last Response Recv from: "); Serial.println(macStr);
+  Serial.print("Last Response Recv from: "); Serial.println(macStr);
-  uint8_t recData[3];
+  memcpy(boardData, data, data_len);
-  memcpy(recData, data, data_len);
+  Serial.print("Recieved data! len: ");
-  Serial.print("Last Response Recv Data: "); Serial.println(recData[0]); Serial.print(" "); Serial.print(recData[1]); Serial.print(" len:");  Serial.println(data_len);
+  Serial.println(data_len);
 }
 
 //############ End ESP Now
@@ -278,6 +291,7 @@ void calculateThrottlePosition() {
     total += analogRead(leverPin);
   }
   hallMeasurement = total / 10;
+  Serial.print("HAL: ");
   Serial.println(hallMeasurement);
   //DEBUG_PRINT( (String)hallMeasurement );
 
@@ -300,8 +314,10 @@ float batteryVoltage() {
   for (int i = 0; i < 10; i++) {
     total += analogRead(batteryMeasurePin);
   }
-
+  batteryVoltage = (refVoltage / 4095.0) * ((float)total / 10.0);
-  batteryVoltage = (refVoltage / 4096.0) * ((float)total / 10.0);
+  // Now we have the actual Voltage, lets calculate the value befor the devider
+  batteryVoltage = batteryVoltage / ( deviderR1 / (deviderR1 + deviderR2));
+  Serial.print("Batt: ");
   Serial.println(batteryVoltage);
   return batteryVoltage;
 }
@@ -323,6 +339,7 @@ int batteryLevel() {
 int getStrength(int points){
   long rssi = 0;
   long averageRSSI=0;
+  if (points == 1) return WiFi.RSSI();
 
   for (int i=0; i < points; i++) {
     rssi += WiFi.RSSI();
@@ -330,6 +347,8 @@ int getStrength(int points){
   }
 
   averageRSSI=rssi/points;
+  Serial.print("RSSI: ");
+  Serial.println(averageRSSI);
   return averageRSSI;
 }
 
@@ -383,7 +402,6 @@ void drawThrottle() {
 void drawSignal() {
   // Position on OLED
   int x = 114; int y = 17;
-/*
   if (connected == true) {
     if (triggerActive()) {
       u8g2.drawXBM(x, y, 12, 12, signal_transmitting_bits);
@@ -402,7 +420,6 @@ void drawSignal() {
       u8g2.drawXBM(x, y, 12, 12, signal_noconnection_bits);
     }
   }
- */
 }
 
 void drawTitleScreen(String title) {
@@ -415,13 +432,55 @@ void drawTitleScreen(String title) {
   delay(1500);
 }
 
-void drawBoardVoltage() {
+
+
+void drawPage() {
+  int decimals;
+  String suffix;
+  String prefix;
+
+  int first, last;
 
   int x = 0;
   int y = 16;
-  String suffix = "V";
+
-  String prefix = "BATTERY";
+  // Rotate the realtime data each 4s.
-  float value = 0.0; // TODO: No info this yet, measure in the board
+  if ((millis() - lastDataRotation) >= 4000) {
+
+    lastDataRotation = millis();
+    displayData++;
+
+    if (displayData > 2) {
+      displayData = 0;
+    }
+  }
+
+  switch (displayData) {
+  case 0:
+    //value = ratioRpmSpeed * data.rpm;
+    first = boardData[B_TEMP];
+    last = boardData[B_TEMP_D];
+    suffix = "C";
+    prefix = "BOX TEMP";
+    decimals = 2;
+    break;
+  case 1:
+    //value = ratioPulseDistance * data.tachometerAbs;
+    // TODO : check how that will work once hal is wired
+    first = boardData[B_SPEED];
+    last = boardData[B_SPEED_D];
+    suffix = "KM";
+    prefix = "DISTANCE";
+    decimals = 2;
+    break;
+  case 2:
+    first = boardData[B_VOLT];
+    last = boardData[B_VOLT_D];
+    suffix = "V";
+    prefix = "BATTERY";
+    decimals = 2;
+    break;
+  }
 
   // Display prefix (title)
   displayString = prefix;
@@ -429,15 +488,13 @@ void drawBoardVoltage() {
   u8g2.setFont(u8g2_font_profont12_tr);
   u8g2.drawStr(x, y - 1, displayBuffer);
 
-  // Split up the float value: a number, b decimals.
-  int first = abs(floor(value));
-  int last = value * pow(10, 3) - first * pow(10, 3);
-
   // Add leading zero
   if (first <= 9) {
-    displayString = "0" + (String)first;
+    if(connected) displayString = "0" + (String)first;
+    else displayString = "XX";
   } else {
-    displayString = (String)first;
+    if(connected) displayString = (String)first;
+    else displayString = "XX";
   }
 
   // Display numbers
@@ -446,8 +503,17 @@ void drawBoardVoltage() {
   u8g2.drawStr(x + 55, y + 13, displayBuffer);
 
   // Display decimals
-  displayString = "." + (String)last;
+  // Add leading zero
-  displayString.toCharArray(displayBuffer, 3);
+  if (last <= 9) {
+    if(connected) displayString = ".0" + (String)last;
+    else displayString = ".XX";
+  } else {
+    if(connected) displayString = "." + (String)last;
+    else displayString = ".XX";
+  }
+
+  // Display decimals
+  displayString.toCharArray(displayBuffer, decimals + 2);
   u8g2.setFont(u8g2_font_profont12_tr);
   u8g2.drawStr(x + 86, y - 1, displayBuffer);
 
@@ -456,6 +522,7 @@ void drawBoardVoltage() {
   displayString.toCharArray(displayBuffer, 10);
   u8g2.setFont(u8g2_font_profont12_tr);
   u8g2.drawStr(x + 86 + 2, y + 13, displayBuffer);
+
 }
 
 void drawSettingsMenu() {
@@ -483,6 +550,58 @@ void drawSettingsMenu() {
      }
    */
 }
+void controlSettingsMenu() {
+  /*
+     if (triggerActive()) {
+     if (settingsChangeFlag == false) {
+
+      // Save settings to EEPROM
+      if (changeSelectedSetting == true) {
+        updateEEPROMSettings();
+      }
+
+      changeSelectedSetting = !changeSelectedSetting;
+      settingsChangeFlag = true;
+     }
+     } else {
+     settingsChangeFlag = false;
+     }
+
+     if (hallMeasurement >= (remoteSettings.maxHallValue - 150) && settingsLoopFlag == false) {
+     // Up
+     if (changeSelectedSetting == true) {
+      int val = getSettingValue(currentSetting) + 1;
+
+      if (inRange(val, settingRules[currentSetting][1], settingRules[currentSetting][2])) {
+        setSettingValue(currentSetting, val);
+        settingsLoopFlag = true;
+      }
+     } else {
+      if (currentSetting != 0) {
+        currentSetting--;
+        settingsLoopFlag = true;
+      }
+     }
+     }
+     else if (hallMeasurement <= (remoteSettings.minHallValue + 150) && settingsLoopFlag == false) {
+     // Down
+     if (changeSelectedSetting == true) {
+      int val = getSettingValue(currentSetting) - 1;
+
+      if (inRange(val, settingRules[currentSetting][1], settingRules[currentSetting][2])) {
+        setSettingValue(currentSetting, val);
+        settingsLoopFlag = true;
+      }
+     } else {
+      if (currentSetting < (numOfSettings - 1)) {
+        currentSetting++;
+        settingsLoopFlag = true;
+      }
+     }
+     } else if (inRange(hallMeasurement, remoteSettings.centerHallValue - 50, remoteSettings.centerHallValue + 50)) {
+     settingsLoopFlag = false;
+     }*/
+}
 
 void drawSettingNumber() {
   // Position on OLED
@@ -509,7 +628,7 @@ void updateMainDisplay() {
       drawSettingNumber();
     } else {
       drawThrottle();
-      drawBoardVoltage();
+      drawPage();
       drawBatteryLevel();
       drawSignal();
     }
@@ -527,7 +646,7 @@ void drawStartScreen() {
     u8g2.setFont(u8g2_font_helvR10_tr  );
     u8g2.drawStr(34, 22, displayBuffer);
   } while ( u8g2.nextPage() );
-  delay(1500);
+  delay(800);
 }
 
 //############ End Drawing Functions
@@ -544,6 +663,8 @@ void setup() {
   delay(50);
   digitalWrite(16, HIGH);
 
+  analogSetPinAttenuation(batteryMeasurePin, ADC_6db);
+
   // setup other pins
   pinMode(triggerPin, INPUT_PULLUP);
 
@@ -569,12 +690,10 @@ void setup() {
     ESP.restart();
   }
 
-  //configDeviceAP(true);
-
   // Once ESPNow is successfully Init, we will register for Send CB to
   // get the status of Trasnmitted packet
   esp_now_register_send_cb(OnDataSent);
-  //ScanForboard();
+  //ScanForBoard();
 
   // Once ESPNow is successfully Init, we will register for recv CB to
   // get recv packer info.
@@ -590,11 +709,15 @@ void setup() {
 }
 
 void loop() {
-  // Call function to update display and LED
   updateMainDisplay();
 
-  calculateThrottlePosition();
+  readAccel();
+  Serial.print("Accel Values: ");
+  Serial.print(AcX);
+  Serial.print(" ");
+  Serial.println(GyX);
 
+  calculateThrottlePosition();
   if (changeSettings == true) {
     // Use throttle and trigger to change settings
     //controlSettingsMenu();
@@ -614,34 +737,14 @@ void loop() {
       // Add board as peer if it has not been added already
       bool isPaired = manageBoard();
       if (isPaired) {
-        // pair success or already paired
-        // Send data to device
-
         sendData();
-        /* update Value
-           char buf[10];
-           sprintf(buf, "%i", map(analogRead(leverPin), HAL_MIN, HAL_MAX, TRIM_LOW, TRIM_HIGH));
-           u8g2.firstPage();
-           do {
-           u8g2.setFont(u8g2_font_10x20_tr );
-           u8g2.drawStr(0, 20, buf);
-           } while ( u8g2.nextPage() );
-         */
       } else {
         // board pair failed
-
         Serial.println("board not found / paired!");
       }
     }
     else {
       // No board found to process
     }
-
-    delay(20);
   }
-
-  readAccel();
-  Serial.print(AcX);
-  Serial.print(" ");
-  Serial.println(GyX);
 }