Voltage in box measuring fully working

src/receiver.cpp

@@ -11,13 +11,19 @@
 
 #define esc1pin 15
 #define esc2pin 13
-#define fallbackpin 36
+#define voltageEnable 12
+#define voltagePin 36
 #define failsafeValue 127
 #define ONE_WIRE_BUS 14
 #define fanRelais 16
 
 #define DELETEBEFOREPAIR 0
 
+// Resistors in Ohms
+const float deviderR1 = 1275; // needs to be calibrated carefully using a multimeter because of tolerances of the resistors
+const float deviderR2 = 22000;
+const float refVoltage = 3.3;
+
 Servo esc1;
 Servo esc2;
 SSD1306 display(0x3c, 5, 4);
@@ -194,7 +200,36 @@ void checkTemperature() {
   sendTemperatureDecimals = (temperature - sendTemperature) * 100;
 }
 
+void checkVoltage() {
+  digitalWrite(voltageEnable, HIGH);
+  Serial.print("Voltage: ");
+  int value = analogRead(voltagePin);
+  Serial.println(value);
+
+
+  float batteryVoltage = 0.0;
+  int total = 0;
+
+  for (int i = 0; i < 10; i++) {
+    total += analogRead(voltagePin);
+  }
+
+  batteryVoltage = (refVoltage / 4095.0) * ((float)total / 10.0);
+  // Now we have the actual Voltage, lets calculate the value befor the devider
+  batteryVoltage = batteryVoltage / ( deviderR1 / (deviderR1 + deviderR2));
+
+  sendVoltage = abs(floor(batteryVoltage));
+  sendVoltageDecimals = (batteryVoltage - sendVoltage) * 100;
+  Serial.print("Voltage: ");
+  Serial.println(batteryVoltage);
+  digitalWrite(voltageEnable, LOW);  // change to low
+  delay(5);
+  Serial.print("VoltageOFF: ");
+  Serial.println(analogRead(voltagePin));
+}
+
 void setup() {
+
   Serial.begin(115200);
   Serial.println("ESPNowSkate Receiver");
 
@@ -202,6 +237,8 @@ void setup() {
   display.flipScreenVertically();
   display.setFont(ArialMT_Plain_16);
 
+  pinMode(voltageEnable, OUTPUT);
+
   // Init escs, min and max value similar as Traxxas TQI 1100, 1900
   // chanel, minAngel, maxAngel, minPulseWidth, maxPulseWidth
   esc1.attach(esc1pin, 0, 0, 255, 1100, 1900);
@@ -260,4 +297,5 @@ void loop() {
   }
 
   checkTemperature();
+  checkVoltage();
 }

src/remote.cpp

@@ -48,7 +48,7 @@ byte hallCenterMargin = 5;
 byte currentSetting = 0;
 const byte numOfSettings = 11;
 
-const float minVoltage = 3.25;
+const float minVoltage = 3.4;
 const float maxVoltage = 4.1;
 const float refVoltage = 3.3;
 // Resistors in Ohms
@@ -469,8 +469,8 @@ void drawPage() {
     // TODO : check how that will work once hal is wired
     first = boardData[B_SPEED];
     last = boardData[B_SPEED_D];
-    suffix = "KM";
+    suffix = "KmH";
-    prefix = "DISTANCE";
+    prefix = "SPEED";
     decimals = 2;
     break;
   case 2:
@@ -491,14 +491,14 @@ void drawPage() {
   // Add leading zero
   if (first <= 9) {
     if(connected) displayString = "0" + (String)first;
-    else displayString = "XX";
+    else displayString = "--";
   } else {
     if(connected) displayString = (String)first;
-    else displayString = "XX";
+    else displayString = "--";
   }
 
   // Display numbers
-  displayString.toCharArray(displayBuffer, 10);
+  displayString.toCharArray(displayBuffer, 4);
   u8g2.setFont(u8g2_font_logisoso22_tn );
   u8g2.drawStr(x + 55, y + 13, displayBuffer);
 
@@ -506,10 +506,10 @@ void drawPage() {
   // Add leading zero
   if (last <= 9) {
     if(connected) displayString = ".0" + (String)last;
-    else displayString = ".XX";
+    else displayString = ".--";
   } else {
     if(connected) displayString = "." + (String)last;
-    else displayString = ".XX";
+    else displayString = ".--";
   }
 
   // Display decimals