Voltage in box measuring fully working

This commit is contained in:
Lukas Bachschwell 2018-04-26 17:10:44 +02:00
parent 41cc32d73b
commit 5645bb8846
2 changed files with 47 additions and 9 deletions

View File

@ -11,13 +11,19 @@
#define esc1pin 15
#define esc2pin 13
#define fallbackpin 36
#define voltageEnable 12
#define voltagePin 36
#define failsafeValue 127
#define ONE_WIRE_BUS 14
#define fanRelais 16
#define DELETEBEFOREPAIR 0
// Resistors in Ohms
const float deviderR1 = 1275; // needs to be calibrated carefully using a multimeter because of tolerances of the resistors
const float deviderR2 = 22000;
const float refVoltage = 3.3;
Servo esc1;
Servo esc2;
SSD1306 display(0x3c, 5, 4);
@ -194,7 +200,36 @@ void checkTemperature() {
sendTemperatureDecimals = (temperature - sendTemperature) * 100;
}
void checkVoltage() {
digitalWrite(voltageEnable, HIGH);
Serial.print("Voltage: ");
int value = analogRead(voltagePin);
Serial.println(value);
float batteryVoltage = 0.0;
int total = 0;
for (int i = 0; i < 10; i++) {
total += analogRead(voltagePin);
}
batteryVoltage = (refVoltage / 4095.0) * ((float)total / 10.0);
// Now we have the actual Voltage, lets calculate the value befor the devider
batteryVoltage = batteryVoltage / ( deviderR1 / (deviderR1 + deviderR2));
sendVoltage = abs(floor(batteryVoltage));
sendVoltageDecimals = (batteryVoltage - sendVoltage) * 100;
Serial.print("Voltage: ");
Serial.println(batteryVoltage);
digitalWrite(voltageEnable, LOW); // change to low
delay(5);
Serial.print("VoltageOFF: ");
Serial.println(analogRead(voltagePin));
}
void setup() {
Serial.begin(115200);
Serial.println("ESPNowSkate Receiver");
@ -202,6 +237,8 @@ void setup() {
display.flipScreenVertically();
display.setFont(ArialMT_Plain_16);
pinMode(voltageEnable, OUTPUT);
// Init escs, min and max value similar as Traxxas TQI 1100, 1900
// chanel, minAngel, maxAngel, minPulseWidth, maxPulseWidth
esc1.attach(esc1pin, 0, 0, 255, 1100, 1900);
@ -260,4 +297,5 @@ void loop() {
}
checkTemperature();
checkVoltage();
}

View File

@ -48,7 +48,7 @@ byte hallCenterMargin = 5;
byte currentSetting = 0;
const byte numOfSettings = 11;
const float minVoltage = 3.25;
const float minVoltage = 3.4;
const float maxVoltage = 4.1;
const float refVoltage = 3.3;
// Resistors in Ohms
@ -469,8 +469,8 @@ void drawPage() {
// TODO : check how that will work once hal is wired
first = boardData[B_SPEED];
last = boardData[B_SPEED_D];
suffix = "KM";
prefix = "DISTANCE";
suffix = "KmH";
prefix = "SPEED";
decimals = 2;
break;
case 2:
@ -491,14 +491,14 @@ void drawPage() {
// Add leading zero
if (first <= 9) {
if(connected) displayString = "0" + (String)first;
else displayString = "XX";
else displayString = "--";
} else {
if(connected) displayString = (String)first;
else displayString = "XX";
else displayString = "--";
}
// Display numbers
displayString.toCharArray(displayBuffer, 10);
displayString.toCharArray(displayBuffer, 4);
u8g2.setFont(u8g2_font_logisoso22_tn );
u8g2.drawStr(x + 55, y + 13, displayBuffer);
@ -506,10 +506,10 @@ void drawPage() {
// Add leading zero
if (last <= 9) {
if(connected) displayString = ".0" + (String)last;
else displayString = ".XX";
else displayString = ".--";
} else {
if(connected) displayString = "." + (String)last;
else displayString = ".XX";
else displayString = ".--";
}
// Display decimals