Adding graphics and fun things from firefly remote

.gitignore

@@ -1,2 +1,3 @@
 .pioenvs
 .piolibdeps
+*.h.gch

src/graphics.h

@@ -0,0 +1,16 @@
+static unsigned char logo_bits[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x00, 0x80, 0x3c, 0x01, 0xe0, 0x00, 0x07, 0x70, 0x18, 0x0e, 0x30, 0x18, 0x0c, 0x98, 0x99, 0x19, 0x80, 0xff, 0x01, 0x04, 0xc3, 0x20, 0x0c, 0x99, 0x30, 0xec, 0xa5, 0x37, 0xec, 0xa5, 0x37, 0x0c, 0x99, 0x30, 0x04, 0xc3, 0x20, 0x80, 0xff, 0x01, 0x98, 0x99, 0x19, 0x30, 0x18, 0x0c, 0x70, 0x18, 0x0e, 0xe0, 0x00, 0x07, 0x80, 0x3c, 0x01, 0x00, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
+
+static unsigned char signal_transmitting_bits[] = {
+  0x18, 0x00, 0x0c, 0x00, 0xc6, 0x00, 0x66, 0x00, 0x23, 0x06, 0x33, 0x0f,
+  0x33, 0x0f, 0x23, 0x06, 0x66, 0x00, 0xc6, 0x00, 0x0c, 0x00, 0x18, 0x00
+};
+
+static unsigned char signal_connected_bits[] = {
+  0x18, 0x00, 0x0c, 0x00, 0xc6, 0x00, 0x66, 0x00, 0x23, 0x06, 0x33, 0x09,
+  0x33, 0x09, 0x23, 0x06, 0x66, 0x00, 0xc6, 0x00, 0x0c, 0x00, 0x18, 0x00
+};
+
+static unsigned char signal_noconnection_bits[] = {
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x00, 0x09,
+  0x00, 0x09, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+};

src/remote.cpp

@@ -7,32 +7,35 @@
 #include <EEPROM.h> // ESP32 ?
 
 #include "mac_config.h"
+#include "graphics.h"
 
-// Defining the type of display used (128x32)
-U8G2_SSD1306_128X64_NONAME_F_SW_I2C u8g2(U8G2_R2, /* clock=*/ 15, /* data=*/ 4, /* reset=*/ 16);
 // Defining variables for OLED display
+U8G2_SSD1306_128X64_NONAME_F_SW_I2C u8g2(U8G2_R2, /* clock=*/ 15, /* data=*/ 4, /* reset=*/ 16);
 char displayBuffer[20];
 String displayString;
 short displayData = 0;
 unsigned long lastSignalBlink;
 unsigned long lastDataRotation;
 
-static unsigned char logo_bits[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x00, 0x80, 0x3c, 0x01, 0xe0, 0x00, 0x07, 0x70, 0x18, 0x0e, 0x30, 0x18, 0x0c, 0x98, 0x99, 0x19, 0x80, 0xff, 0x01, 0x04, 0xc3, 0x20, 0x0c, 0x99, 0x30, 0xec, 0xa5, 0x37, 0xec, 0xa5, 0x37, 0x0c, 0x99, 0x30, 0x04, 0xc3, 0x20, 0x80, 0xff, 0x01, 0x98, 0x99, 0x19, 0x30, 0x18, 0x0c, 0x70, 0x18, 0x0e, 0xe0, 0x00, 0x07, 0x80, 0x3c, 0x01, 0x00, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
+// Defining variables for Settings menu
+bool changeSettings = false;
+bool changeSelectedSetting = false;
 
-static unsigned char signal_transmitting_bits[] = {
+bool settingsLoopFlag = false;
-  0x18, 0x00, 0x0c, 0x00, 0xc6, 0x00, 0x66, 0x00, 0x23, 0x06, 0x33, 0x0f,
+bool settingsChangeFlag = false;
-  0x33, 0x0f, 0x23, 0x06, 0x66, 0x00, 0xc6, 0x00, 0x0c, 0x00, 0x18, 0x00
+bool settingsChangeValueFlag = false;
-};
 
-static unsigned char signal_connected_bits[] = {
+// Defining variables for Hall Effect throttle.
-  0x18, 0x00, 0x0c, 0x00, 0xc6, 0x00, 0x66, 0x00, 0x23, 0x06, 0x33, 0x09,
+short hallMeasurement;
-  0x33, 0x09, 0x23, 0x06, 0x66, 0x00, 0xc6, 0x00, 0x0c, 0x00, 0x18, 0x00
+int throttle = 127;
-};
+int sendThrottle = 127;
+byte hallCenterMargin = 4;
 
-static unsigned char signal_noconnection_bits[] = {
+byte currentSetting = 0;
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x00, 0x09,
+const byte numOfSettings = 11;
-  0x00, 0x09, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+
-};
+const float minVoltage = 3.2;
+const float maxVoltage = 4.1;
 
 // Global copy of slave
 esp_now_peer_info_t slave;
@@ -41,13 +44,16 @@ esp_now_peer_info_t slave;
 #define DELETEBEFOREPAIR 0
 #define HAL_MIN 1290
 #define HAL_MAX 2285
+#define HAL_CENTER 1785
 #define TRIM_LOW 180
 #define TRIM_HIGH 0
 
 //#define pairingMode
 #define leverPin 36
+#define triggerPin 37
 #define batteryMeasurePin 35
 
+
 // ESPNOW functions ##############################
 // Scan for slaves in AP mode
 #ifdef pairingMode
@@ -224,14 +230,59 @@ void OnDataSent(const uint8_t *mac_addr, esp_now_send_status_t status) {
 }
 //############ End ESP Now
 
+//############ Hardware Helpers
+//############
+// Check if an integer is within a min and max value
+bool inRange(int val, int minimum, int maximum) {
+  return ((minimum <= val) && (val <= maximum));
+}
+
 // Return true if trigger is activated, false otherwice
-boolean triggerActive() {
+bool triggerActive() {
   if (digitalRead(triggerPin) == LOW)
     return true;
   else
     return false;
 }
 
+void calculateThrottlePosition() {
+  // Hall sensor reading can be noisy, lets make an average reading.
+  int total = 0;
+  for (int i = 0; i < 10; i++) {
+    total += analogRead(leverPin);
+  }
+  hallMeasurement = total / 10;
+
+  //DEBUG_PRINT( (String)hallMeasurement );
+
+  if (hallMeasurement >= HAL_CENTER) {
+    throttle = constrain(map(hallMeasurement, HAL_CENTER, HAL_MAX, 127, 255), 127, 255);
+  } else {
+    throttle = constrain(map(hallMeasurement, HAL_MIN, HAL_CENTER, 0, 127), 0, 127);
+  }
+  // removeing center noise
+  if (abs(throttle - 127) < hallCenterMargin) {
+    throttle = 127;
+  }
+}
+
+// Function to calculate and return the remotes battery voltage.
+float batteryVoltage() {
+  float batteryVoltage = 0.0;
+  int total = 0;
+
+  return 3.6; // for now always full
+/*
+   for (int i = 0; i < 10; i++) {
+    total += analogRead(batteryMeasurePin);
+   }
+
+   batteryVoltage = (refVoltage / 1024.0) * ((float)total / 10.0);
+
+   return batteryVoltage;
+ */
+}
+
 // Function used to indicate the remotes battery level.
 int batteryLevel() {
   float voltage = batteryVoltage();
@@ -245,23 +296,222 @@ int batteryLevel() {
   }
 }
 
-// Function to calculate and return the remotes battery voltage.
+// Take a number of measurements of the WiFi strength and return the average result.
-float batteryVoltage() {
+int getStrength(int points){
-  float batteryVoltage = 0.0;
+  long rssi = 0;
-  int total = 0;
+  long averageRSSI=0;
 
-  return 3.6; // for now always full
+  for (int i=0; i < points; i++) {
-
+    rssi += WiFi.RSSI();
-  for (int i = 0; i < 10; i++) {
+    delay(20);
-    total += analogRead(batteryMeasurePin);
   }
 
-  batteryVoltage = (refVoltage / 1024.0) * ((float)total / 10.0);
+  averageRSSI=rssi/points;
-
+  return averageRSSI;
-  return batteryVoltage;
 }
 
-// DRAWING
+//############ End Hardware Helpers
+
+//############ Drawing Functions
+
+void drawBatteryLevel() {
+  int level = batteryLevel();
+
+  // Position on OLED
+  int x = 108; int y = 4;
+
+  u8g2.drawFrame(x + 2, y, 18, 9);
+  u8g2.drawBox(x, y + 2, 2, 5);
+
+  for (int i = 0; i < 5; i++) {
+    int p = round((100 / 5) * i);
+    if (p <= level)
+    {
+      u8g2.drawBox(x + 4 + (3 * i), y + 2, 2, 5);
+    }
+  }
+}
+
+void drawThrottle() {
+  int x = 0;
+  int y = 18;
+
+  // Draw throttle
+  u8g2.drawHLine(x, y, 52);
+  u8g2.drawVLine(x, y, 10);
+  u8g2.drawVLine(x + 52, y, 10);
+  u8g2.drawHLine(x, y + 10, 5);
+  u8g2.drawHLine(x + 52 - 4, y + 10, 5);
+
+  if (sendThrottle >= 127) {
+    int width = map(sendThrottle, 127, 255, 0, 49);
+
+    for (int i = 0; i < width; i++) {
+      u8g2.drawVLine(x + i + 2, y + 2, 7);
+    }
+  } else {
+    int width = map(sendThrottle, 0, 126, 49, 0);
+    for (int i = 0; i < width; i++) {
+      u8g2.drawVLine(x + 50 - i, y + 2, 7);
+    }
+  }
+}
+
+void drawSignal() {
+  // Position on OLED
+  int x = 114; int y = 17;
+/*
+   if (connected == true) {
+    if (triggerActive()) {
+      u8g2.drawXBM(x, y, 12, 12, signal_transmitting_bits);
+    } else {
+      u8g2.drawXBM(x, y, 12, 12, signal_connected_bits);
+    }
+   } else {
+    if (millis() - lastSignalBlink > 500) {
+      signalBlink = !signalBlink;
+      lastSignalBlink = millis();
+    }
+
+    if (signalBlink == true) {
+      u8g2.drawXBM(x, y, 12, 12, signal_connected_bits);
+    } else {
+      u8g2.drawXBM(x, y, 12, 12, signal_noconnection_bits);
+    }
+   }
+ */
+}
+
+void drawTitleScreen(String title) {
+  u8g2.firstPage();
+  do {
+    title.toCharArray(displayBuffer, 20);
+    u8g2.setFont(u8g2_font_helvR10_tr  );
+    u8g2.drawStr(12, 20, displayBuffer);
+  } while ( u8g2.nextPage() );
+  delay(1500);
+}
+
+void drawPage() {
+  /*
+     int decimals;
+     float value;
+     String suffix;
+     String prefix;
+
+     int first, last;
+
+     int x = 0;
+     int y = 16;
+
+     // Rotate the realtime data each 4s.
+     if ((millis() - lastDataRotation) >= 4000) {
+
+     lastDataRotation = millis();
+     displayData++;
+
+     if (displayData > 2) {
+      displayData = 0;
+     }
+     }
+
+     switch (displayData) {
+     case 0:
+     value = ratioRpmSpeed * data.rpm;
+     suffix = "KMH";
+     prefix = "SPEED";
+     decimals = 1;
+     break;
+     case 1:
+     value = ratioPulseDistance * data.tachometerAbs;
+     suffix = "KM";
+     prefix = "DISTANCE";
+     decimals = 2;
+     break;
+     case 2:
+     value = data.inpVoltage;
+     suffix = "V";
+     prefix = "BATTERY";
+     decimals = 1;
+     break;
+     }
+
+     // Display prefix (title)
+     displayString = prefix;
+     displayString.toCharArray(displayBuffer, 10);
+     u8g2.setFont(u8g2_font_profont12_tr);
+     u8g2.drawStr(x, y - 1, displayBuffer);
+
+     // Split up the float value: a number, b decimals.
+     first = abs(floor(value));
+     last = value * pow(10, 3) - first * pow(10, 3);
+
+     // Add leading zero
+     if (first <= 9) {
+     displayString = "0" + (String)first;
+     } else {
+     displayString = (String)first;
+     }
+
+     // Display numbers
+     displayString.toCharArray(displayBuffer, 10);
+     u8g2.setFont(u8g2_font_logisoso22_tn );
+     u8g2.drawStr(x + 55, y + 13, displayBuffer);
+
+     // Display decimals
+     displayString = "." + (String)last;
+     displayString.toCharArray(displayBuffer, decimals + 2);
+     u8g2.setFont(u8g2_font_profont12_tr);
+     u8g2.drawStr(x + 86, y - 1, displayBuffer);
+
+     // Display suffix
+     displayString = suffix;
+     displayString.toCharArray(displayBuffer, 10);
+     u8g2.setFont(u8g2_font_profont12_tr);
+     u8g2.drawStr(x + 86 + 2, y + 13, displayBuffer);
+   */
+}
+
+void drawSettingsMenu() {
+  /*
+     // Position on OLED
+     int x = 0; int y = 10;
+
+     // Draw setting title
+     displayString = settingPages[currentSetting][0];
+     displayString.toCharArray(displayBuffer, displayString.length() + 1);
+
+     u8g2.setFont(u8g2_font_profont12_tr);
+     u8g2.drawStr(x, y, displayBuffer);
+
+     int val = getSettingValue(currentSetting);
+
+     displayString = (String)val + "" + settingPages[currentSetting][1];
+     displayString.toCharArray(displayBuffer, displayString.length() + 1);
+     u8g2.setFont(u8g2_font_10x20_tr  );
+
+     if (changeSelectedSetting == true) {
+     u8g2.drawStr(x + 10, y + 20, displayBuffer);
+     } else {
+     u8g2.drawStr(x, y + 20, displayBuffer);
+     }
+   */
+}
+
+void drawSettingNumber() {
+  // Position on OLED
+  int x = 2; int y = 10;
+
+  // Draw current setting number box
+  u8g2.drawRFrame(x + 102, y - 10, 22, 32, 4);
+
+  // Draw current setting number
+  displayString = (String)(currentSetting + 1);
+  displayString.toCharArray(displayBuffer, displayString.length() + 1);
+
+  u8g2.setFont(u8g2_font_profont22_tn);
+  u8g2.drawStr(x + 108, 22, displayBuffer);
+}
 
 void updateMainDisplay() {
 
@@ -269,7 +519,7 @@ void updateMainDisplay() {
   do {
 
     if (changeSettings == true) {
-      drawSettingsMenu();
+      //drawSettingsMenu();
       drawSettingNumber();
     } else {
       drawThrottle();
@@ -294,6 +544,8 @@ void drawStartScreen() {
   delay(1500);
 }
 
+//############ End Drawing Functions
+
 void setup() {
   Serial.begin(115200);
   //Set device in STA mode to begin with
@@ -305,11 +557,19 @@ void setup() {
   digitalWrite(16, LOW); // set GPIO16 low to reset OLED
   delay(50);
   digitalWrite(16, HIGH);
-  Serial.println("ESPNowSkate Sender");
 
+  // setup other pins
+  pinMode(triggerPin, INPUT_PULLUP);
+
+  Serial.println("ESPNowSkate Sender");
   u8g2.begin();
   drawStartScreen();
-
+/*
+   if (triggerActive()) {
+    changeSettings = true;
+    drawTitleScreen("Remote Settings");
+   }
+ */
   // This is the mac address of the Master in Station Mode
   Serial.print("STA MAC: "); Serial.println(WiFi.macAddress());
 
@@ -336,6 +596,11 @@ void setup() {
 }
 
 void loop() {
+  // Call function to update display and LED
+  updateMainDisplay();
+
+
+  /* update Value
      char buf[10];
      sprintf(buf, "%i", map(analogRead(leverPin), HAL_MIN, HAL_MAX, TRIM_LOW, TRIM_HIGH));
      u8g2.firstPage();
@@ -343,7 +608,21 @@ void loop() {
      u8g2.setFont(u8g2_font_10x20_tr );
      u8g2.drawStr(0, 20, buf);
      } while ( u8g2.nextPage() );
+   */
 
+  calculateThrottlePosition();
+
+  if (changeSettings == true) {
+    // Use throttle and trigger to change settings
+    //controlSettingsMenu();
+  } else {
+    // Use throttle and trigger to drive motors
+    if (triggerActive()) {
+      sendThrottle = throttle;
+    } else {
+      // 127 is the middle position - no throttle and no brake/reverse
+      sendThrottle = 127;
+    }
 
     // If Slave is found, it would be populate in `slave` variable
     // We will check if `slave` is defined and then we proceed further
@@ -367,3 +646,4 @@ void loop() {
 
     delay(20);
   }
+}