WS2812 and great rpm improvements

platformio.ini

@@ -33,4 +33,4 @@ monitor_baud = 115200
 lib_deps =
   ServoESP32
   DallasTemperature
-  FastLED
+  Adafruit NeoPixel

readme.md

@@ -22,7 +22,6 @@ it features:
 
 ### Software:
 
-implement ws2812
 add graphics to quick selection
 implement display on reciever
 rpm direction and calibration

src/lights.h

@@ -1,23 +1,53 @@
-#include "FastLED.h"
+#include <Adafruit_NeoPixel.h>
 
-#define NUM_STRIPS 2
+#define NUM_LEDS 40
-#define NUM_LEDS_PER_STRIP 10
+#define PIN_STRIP 17
-CRGB leds[NUM_STRIPS][NUM_LEDS_PER_STRIP];
+bool shouldUpdateLights = false;
-#define PIN_STRIP1 34
+
+Adafruit_NeoPixel pixels = Adafruit_NeoPixel(NUM_LEDS, PIN_STRIP, NEO_GRB + NEO_KHZ800);
+
+void lightOff() {
+  for(int i = 0; i < NUM_LEDS; i++) {
+    pixels.setPixelColor(i, pixels.Color(0,0,0));
+  }
+  portDISABLE_INTERRUPTS();
+  pixels.show();
+  portENABLE_INTERRUPTS();
+}
+
+void lightWhite() {
+  for(int i = 0; i < NUM_LEDS; i++) {
+    pixels.setPixelColor(i, pixels.Color(180,180,180));
+  }
+  portDISABLE_INTERRUPTS();
+  pixels.show();
+  portENABLE_INTERRUPTS();
+}
+
+void lightBackFront() {
+  // Implement me :-)
+  for(int i = 0; i < NUM_LEDS; i++) {
+    pixels.setPixelColor(i, pixels.Color(180,180,180));
+  }
+  portDISABLE_INTERRUPTS();
+  pixels.show();
+  portENABLE_INTERRUPTS();
+}
+
+void updateLights() {
+  if(lightActive) {
+    lightWhite();
+  }else {
+    lightOff();
+  }
+
+  shouldUpdateLights = false;
+}
 
 void setupLights() {
-  FastLED.addLeds<NEOPIXEL, PIN_STRIP1>(leds[0], NUM_LEDS_PER_STRIP);
+  portDISABLE_INTERRUPTS();
-}
+  pixels.begin();
-
+  portENABLE_INTERRUPTS();
-void loopLights() {
+  delay(1);
-  // This outer loop will go over each strip, one at a time
+  lightOff();
-  for(int x = 0; x < NUM_STRIPS; x++) {
-    // This inner loop will go over each led in the current strip, one at a time
-    for(int i = 0; i < NUM_LEDS_PER_STRIP; i++) {
-      leds[x][i] = CRGB::Red;
-      FastLED.show();
-      leds[x][i] = CRGB::Black;
-      delay(100);
-    }
-  }
 }

src/receiver.cpp

@@ -66,7 +66,11 @@ int fanMode = FANS_AUTO;
 void setBoardOptions(uint8_t options) {
   Serial.print("opt: ");
   Serial.println(options, BIN);
-  lightActive = options & 1;
+  if(lightActive != options & 1) {
+    lightActive = options & 1;
+    shouldUpdateLights = true;
+  }
+
   fanMode = (options >> 2) & 3;
 }
 
@@ -276,6 +280,9 @@ void setup() {
 
   sensors.begin();
 
+  setupLights();
+  lightOff();
+
   xTaskCreatePinnedToCore(
     measureRpm,
     "rpm task",
@@ -336,4 +343,5 @@ void loop() {
 
   checkTemperature();
   checkVoltage();
+  if(shouldUpdateLights) updateLights();
 }

src/rpm.h

@@ -6,15 +6,21 @@
 #define halYellowRight 18
 #define halGreenRight 5
 
+#define FORWARD 0
+#define BACKWARD 1
+
 #define wheelCircumference 26.062
+#define pulsesPerRotation 22
+
+#include "driver/pcnt.h"
 
 TaskHandle_t rpmTaskHandle;
 int rpmRight = 0;
 int rpmLeft = 0;
 
 int lastState[2] = {1, 1};
-long lastTime[2] = {0, 0};
+int16_t counter[2] = {0, 0};
-int counter[2] = {0, 0};
+int direction[2] = {0, 0};
 
 long rpmTimer = 0;
 
@@ -39,6 +45,10 @@ int relativeLookup[6][6] {
   { 1, 2,-3,-2,-1, 0}  // 6
 };
 
+#define PCNT_UNIT_LEFT PCNT_UNIT_0
+#define PCNT_UNIT_RIGHT PCNT_UNIT_1
+
+
 int getState(bool isLeft) {
   if(isLeft) {
     return motorPosition[digitalRead(halBlueLeft)][digitalRead(halYellowLeft)][digitalRead(halGreenLeft)];
@@ -55,18 +65,67 @@ void initRPMPins() {
   pinMode(halBlueRight, INPUT_PULLUP);
   pinMode(halYellowRight, INPUT_PULLUP);
   pinMode(halGreenRight, INPUT_PULLUP);
+
+  // init counter
+  pcnt_config_t pcnt_config_left = {
+    .pulse_gpio_num = halBlueLeft,
+    .ctrl_gpio_num = PCNT_PIN_NOT_USED,
+    .lctrl_mode = PCNT_MODE_KEEP,
+    .hctrl_mode = PCNT_MODE_KEEP,
+    .pos_mode = PCNT_COUNT_INC,  // count both rising and falling edges
+    .neg_mode = PCNT_COUNT_INC,
+    .counter_h_lim = 32767,
+    .counter_l_lim = -1,
+    .unit = PCNT_UNIT_LEFT,
+    .channel = PCNT_CHANNEL_0
+  };
+
+  pcnt_config_t pcnt_config_right = {
+    .pulse_gpio_num = halBlueRight,
+    .ctrl_gpio_num = PCNT_PIN_NOT_USED,
+    .lctrl_mode = PCNT_MODE_KEEP,
+    .hctrl_mode = PCNT_MODE_KEEP,
+    .pos_mode = PCNT_COUNT_INC,  // count both rising and falling edges
+    .neg_mode = PCNT_COUNT_INC,
+    .counter_h_lim = 32767,
+    .counter_l_lim = -1,
+    .unit = PCNT_UNIT_RIGHT,
+    .channel = PCNT_CHANNEL_0
+  };
+
+  pcnt_unit_config(&pcnt_config_left);
+  pcnt_unit_config(&pcnt_config_right);
+
+
+  pcnt_counter_pause(PCNT_UNIT_LEFT);
+  pcnt_counter_pause(PCNT_UNIT_RIGHT);
+
+  pcnt_counter_clear(PCNT_UNIT_LEFT);
+  pcnt_counter_clear(PCNT_UNIT_RIGHT);
+
+  pcnt_counter_resume(PCNT_UNIT_LEFT);
+  pcnt_counter_resume(PCNT_UNIT_RIGHT);
+
 }
 
 void measureRpm(void * parameter) {
+
   while(true) {
     if(millis()-rpmTimer>250) {
-      rpmRight = constrain(counter[0], 0, 350)*4;
+      // read counters
-      rpmLeft = constrain(counter[1], 0, 350)*4;
+      pcnt_get_counter_value(PCNT_UNIT_LEFT, &counter[1]);
-      kmh = (wheelCircumference/100) * (rpmRight+rpmLeft)/2 * 60/1000;
+      pcnt_get_counter_value(PCNT_UNIT_RIGHT, &counter[0]);
 
+      pcnt_counter_clear(PCNT_UNIT_LEFT);
+      pcnt_counter_clear(PCNT_UNIT_RIGHT);
+
+
+      rpmRight = (counter[0]/pulsesPerRotation)*4;
+      rpmLeft = (counter[1]/pulsesPerRotation)*4;
+      kmh = (wheelCircumference/100) * (rpmRight+rpmLeft)/2 * 3600/1000;
+      Serial.print(kmh); Serial.print(" "); Serial.println(direction[0]);
       sendSpeed = abs(floor(kmh));
       sendSpeedDecimals = (kmh - sendSpeed) * 100;
-      Serial.print("remote "); Serial.println(kmh);
       counter[true] = 0;
       counter[false] = 0;
       rpmTimer = millis();
@@ -74,16 +133,25 @@ void measureRpm(void * parameter) {
 
     int state = getState(0);
     if(lastState[0] != state) {
-      counter[0] = counter[0] + relativeLookup[lastState[0]-1][state-1];
+      if(relativeLookup[lastState[0]-1][state-1] > 0) {
+        direction[0] = FORWARD;
+      } else {
+        direction[0] = BACKWARD;
+      }
       lastState[0] = state;
     }
 
     state = getState(1);
     if(lastState[1] != state) {
-      counter[1] = counter[1] + relativeLookup[lastState[1]-1][state-1];
+      if(relativeLookup[lastState[1]-1][state-1] > 0) {
+        direction[1] = FORWARD;
+      } else {
+        direction[1] = BACKWARD;
+      }
+
       lastState[1] = state;
     }
 
-    vTaskDelay(pdMS_TO_TICKS(1));
+    vTaskDelay(1 / portTICK_PERIOD_MS);
   }
 }