Add PIO Example

Signed-off-by: Lukas Bachschwell <lukas@lbsfilm.at>

pio_examples/gui/.gitignore

@@ -0,0 +1 @@
+.pio

pio_examples/gui/platformio.ini

@@ -0,0 +1,16 @@
+; PlatformIO Project Configuration File
+;
+;   Build options: build flags, source filter
+;   Upload options: custom upload port, speed and extra flags
+;   Library options: dependencies, extra library storages
+;   Advanced options: extra scripting
+;
+; Please visit documentation for the other options and examples
+; https://docs.platformio.org/page/projectconf.html
+
+[env:esp8266]
+platform = espressif8266
+board = nodemcuv2
+framework = arduino
+
+lib_extra_dirs = ../../

pio_examples/gui/src/gui.ino

@@ -0,0 +1,270 @@
+#include <DNSServer.h>
+#include <ESPUI.h>
+
+const byte DNS_PORT = 53;
+IPAddress apIP(192, 168, 1, 1);
+DNSServer dnsServer;
+
+#if defined(ESP32)
+#include <WiFi.h>
+#else
+#include <ESP8266WiFi.h>
+#endif
+
+const char* ssid = "ESPUI";
+const char* password = "espui";
+
+const char* hostname = "espui";
+
+int statusLabelId;
+int graphId;
+int millisLabelId;
+int testSwitchId;
+
+void numberCall(Control* sender, int type)
+{
+    Serial.println(sender->value);
+}
+
+void textCall(Control* sender, int type)
+{
+    Serial.print("Text: ID: ");
+    Serial.print(sender->id);
+    Serial.print(", Value: ");
+    Serial.println(sender->value);
+}
+
+void slider(Control* sender, int type)
+{
+    Serial.print("Slider: ID: ");
+    Serial.print(sender->id);
+    Serial.print(", Value: ");
+    Serial.println(sender->value);
+    // Like all Control Values in ESPUI slider values are Strings. To use them as int simply do this:
+    int sliderValueWithOffset = sender->value.toInt() + 100;
+    Serial.print("SliderValue with offset");
+    Serial.println(sliderValueWithOffset);
+}
+
+void buttonCallback(Control* sender, int type)
+{
+    switch (type)
+    {
+    case B_DOWN:
+        Serial.println("Button DOWN");
+        break;
+
+    case B_UP:
+        Serial.println("Button UP");
+        break;
+    }
+}
+
+void buttonExample(Control* sender, int type)
+{
+    switch (type)
+    {
+    case B_DOWN:
+        Serial.println("Status: Start");
+        ESPUI.print(statusLabelId, "Start");
+        break;
+
+    case B_UP:
+        Serial.println("Status: Stop");
+        ESPUI.print(statusLabelId, "Stop");
+        break;
+    }
+}
+void padExample(Control* sender, int value)
+{
+    switch (value)
+    {
+    case P_LEFT_DOWN:
+        Serial.print("left down");
+        break;
+
+    case P_LEFT_UP:
+        Serial.print("left up");
+        break;
+
+    case P_RIGHT_DOWN:
+        Serial.print("right down");
+        break;
+
+    case P_RIGHT_UP:
+        Serial.print("right up");
+        break;
+
+    case P_FOR_DOWN:
+        Serial.print("for down");
+        break;
+
+    case P_FOR_UP:
+        Serial.print("for up");
+        break;
+
+    case P_BACK_DOWN:
+        Serial.print("back down");
+        break;
+
+    case P_BACK_UP:
+        Serial.print("back up");
+        break;
+
+    case P_CENTER_DOWN:
+        Serial.print("center down");
+        break;
+
+    case P_CENTER_UP:
+        Serial.print("center up");
+        break;
+    }
+
+    Serial.print(" ");
+    Serial.println(sender->id);
+}
+
+void switchExample(Control* sender, int value)
+{
+    switch (value)
+    {
+    case S_ACTIVE:
+        Serial.print("Active:");
+        break;
+
+    case S_INACTIVE:
+        Serial.print("Inactive");
+        break;
+    }
+
+    Serial.print(" ");
+    Serial.println(sender->id);
+}
+
+void otherSwitchExample(Control* sender, int value)
+{
+    switch (value)
+    {
+    case S_ACTIVE:
+        Serial.print("Active:");
+        break;
+
+    case S_INACTIVE:
+        Serial.print("Inactive");
+        break;
+    }
+
+    Serial.print(" ");
+    Serial.println(sender->id);
+}
+
+void setup(void)
+{
+    ESPUI.setVerbosity(Verbosity::VerboseJSON);
+    Serial.begin(115200);
+
+#if defined(ESP32)
+    WiFi.setHostname(hostname);
+#else
+    WiFi.hostname(hostname);
+#endif
+
+    // try to connect to existing network
+    WiFi.begin(ssid, password);
+    Serial.print("\n\nTry to connect to existing network");
+
+    {
+        uint8_t timeout = 10;
+
+        // Wait for connection, 5s timeout
+        do
+        {
+            delay(500);
+            Serial.print(".");
+            timeout--;
+        } while (timeout && WiFi.status() != WL_CONNECTED);
+
+        // not connected -> create hotspot
+        if (WiFi.status() != WL_CONNECTED)
+        {
+            Serial.print("\n\nCreating hotspot");
+
+            WiFi.mode(WIFI_AP);
+            WiFi.softAPConfig(apIP, apIP, IPAddress(255, 255, 255, 0));
+            WiFi.softAP(ssid);
+
+            timeout = 5;
+
+            do
+            {
+                delay(500);
+                Serial.print(".");
+                timeout--;
+            } while (timeout);
+        }
+    }
+
+    dnsServer.start(DNS_PORT, "*", apIP);
+
+    Serial.println("\n\nWiFi parameters:");
+    Serial.print("Mode: ");
+    Serial.println(WiFi.getMode() == WIFI_AP ? "Station" : "Client");
+    Serial.print("IP address: ");
+    Serial.println(WiFi.getMode() == WIFI_AP ? WiFi.softAPIP() : WiFi.localIP());
+
+    statusLabelId = ESPUI.label("Status:", ControlColor::Turquoise, "Stop");
+    millisLabelId = ESPUI.label("Millis:", ControlColor::Emerald, "0");
+    ESPUI.button("Push Button", &buttonCallback, ControlColor::Peterriver, "Press");
+    ESPUI.button("Other Button", &buttonExample, ControlColor::Wetasphalt, "Press");
+    ESPUI.padWithCenter("Pad with center", &padExample, ControlColor::Sunflower);
+    ESPUI.pad("Pad without center", &padExample, ControlColor::Carrot);
+    testSwitchId = ESPUI.switcher("Switch one", &switchExample, ControlColor::Alizarin, false);
+    ESPUI.switcher("Switch two", &otherSwitchExample, ControlColor::None, true);
+    ESPUI.slider("Slider one", &slider, ControlColor::Alizarin, 30);
+    ESPUI.slider("Slider two", &slider, ControlColor::None, 100);
+    ESPUI.text("Text Test:", &textCall, ControlColor::Alizarin, "a Text Field");
+    ESPUI.number("Numbertest", &numberCall, ControlColor::Alizarin, 5, 0, 10);
+
+    graphId = ESPUI.graph("Graph Test", ControlColor::Wetasphalt);
+
+    /*
+     * .begin loads and serves all files from PROGMEM directly.
+     * If you want to serve the files from SPIFFS use ESPUI.beginSPIFFS
+     * (.prepareFileSystem has to be run in an empty sketch before)
+     */
+
+    // Enable this option if you want sliders to be continuous (update during move) and not discrete (update on stop)
+    // ESPUI.sliderContinuous = true;
+
+    /*
+     * Optionally you can use HTTP BasicAuth. Keep in mind that this is NOT a
+     * SECURE way of limiting access.
+     * Anyone who is able to sniff traffic will be able to intercept your password
+     * since it is transmitted in cleartext. Just add a string as username and
+     * password, for example begin("ESPUI Control", "username", "password")
+     */
+    ESPUI.sliderContinuous = true;
+    ESPUI.begin("ESPUI Control");
+}
+
+void loop(void)
+{
+    dnsServer.processNextRequest();
+
+    static long oldTime = 0;
+    static bool testSwitchState = false;
+    delay(10);
+    return;
+
+    if (millis() - oldTime > 5000)
+    {
+        ESPUI.print(millisLabelId, String(millis()));
+
+        ESPUI.addGraphPoint(graphId, random(1, 50));
+
+        testSwitchState = !testSwitchState;
+        ESPUI.updateSwitcher(testSwitchId, testSwitchState);
+
+        oldTime = millis();
+    }
+}