1
0
mirror of https://github.com/beego/bee.git synced 2024-12-23 11:40:48 +00:00
bee/vendor/golang.org/x/debug/dwarf/frame.go
2017-03-19 23:48:59 +01:00

300 lines
12 KiB
Go

// Copyright 2014 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
// Mapping from PC to SP offset (called CFA - Canonical Frame Address - in DWARF).
// This value is the offset from the stack pointer to the virtual frame pointer
// (address of zeroth argument) at each PC value in the program.
package dwarf
import "fmt"
// http://www.dwarfstd.org/doc/DWARF4.pdf Section 6.4 page 126
// We implement only the CFA column of the table, not the location
// information about other registers. In other words, we implement
// only what we need to understand Go programs compiled by gc.
// PCToSPOffset returns the offset, at the specified PC, to add to the
// SP to reach the virtual frame pointer, which corresponds to the
// address of the zeroth argument of the function, the word on the
// stack immediately above the return PC.
func (d *Data) PCToSPOffset(pc uint64) (offset int64, err error) {
if len(d.frame) == 0 {
return 0, fmt.Errorf("PCToSPOffset: no frame table")
}
var m frameMachine
// Assume the first info unit is the same as us. Extremely likely. TODO?
if len(d.unit) == 0 {
return 0, fmt.Errorf("PCToSPOffset: no info section")
}
buf := makeBuf(d, &d.unit[0], "frame", 0, d.frame)
for len(buf.data) > 0 {
offset, err := m.evalCompilationUnit(&buf, pc)
if err != nil {
return 0, err
}
return offset, nil
}
return 0, fmt.Errorf("PCToSPOffset: no frame defined for PC %#x", pc)
}
// Call Frame instructions. Figure 40, page 181.
// Structure is high two bits plus low 6 bits specified by + in comment.
// Some take one or two operands.
const (
frameNop = 0<<6 + 0x00
frameAdvanceLoc = 1<<6 + 0x00 // + delta
frameOffset = 2<<6 + 0x00 // + register op: ULEB128 offset
frameRestore = 3<<6 + 0x00 // + register
frameSetLoc = 0<<6 + 0x01 // op: address
frameAdvanceLoc1 = 0<<6 + 0x02 // op: 1-byte delta
frameAdvanceLoc2 = 0<<6 + 0x03 // op: 2-byte delta
frameAdvanceLoc4 = 0<<6 + 0x04 // op: 4-byte delta
frameOffsetExtended = 0<<6 + 0x05 // ops: ULEB128 register ULEB128 offset
frameRestoreExtended = 0<<6 + 0x06 // op: ULEB128 register
frameUndefined = 0<<6 + 0x07 // op: ULEB128 register
frameSameValue = 0<<6 + 0x08 // op: ULEB128 register
frameRegister = 0<<6 + 0x09 // op: ULEB128 register ULEB128 register
frameRememberState = 0<<6 + 0x0a
frameRestoreState = 0<<6 + 0x0b
frameDefCFA = 0<<6 + 0x0c // op: ULEB128 register ULEB128 offset
frameDefCFARegister = 0<<6 + 0x0d // op: ULEB128 register
frameDefCFAOffset = 0<<6 + 0x0e // op: ULEB128 offset
frameDefCFAExpression = 0<<6 + 0x0f // op: BLOCK
frameExpression = 0<<6 + 0x10 // op: ULEB128 register BLOCK
frameOffsetExtendedSf = 0<<6 + 0x11 // op: ULEB128 register SLEB128 offset
frameDefCFASf = 0<<6 + 0x12 // op: ULEB128 register SLEB128 offset
frameDefCFAOffsetSf = 0<<6 + 0x13 // op: SLEB128 offset
frameValOffset = 0<<6 + 0x14 // op: ULEB128 ULEB128
frameValOffsetSf = 0<<6 + 0x15 // op: ULEB128 SLEB128
frameValExpression = 0<<6 + 0x16 // op: ULEB128 BLOCK
frameLoUser = 0<<6 + 0x1c
frameHiUser = 0<<6 + 0x3f
)
// frameMachine represents the PC/SP engine.
// Section 6.4, page 129.
type frameMachine struct {
// Initial values from CIE.
version uint8 // Version number, "independent of DWARF version"
augmentation string // Augmentation; treated as unexpected for now. TODO.
addressSize uint8 // In DWARF v4 and above. Size of a target address.
segmentSize uint8 // In DWARF v4 and above. Size of a segment selector.
codeAlignmentFactor uint64 // Unit of code size in advance instructions.
dataAlignmentFactor int64 // Unit of data size in certain offset instructions.
returnAddressRegister int // Pseudo-register (actually data column) representing return address.
returnRegisterOffset int64 // Offset to saved PC from CFA in bytes.
// CFA definition.
cfaRegister int // Which register represents the SP.
cfaOffset int64 // CFA offset value.
// Running machine.
location uint64
}
// evalCompilationUnit scans the frame data for one compilation unit to retrieve
// the offset information for the specified pc.
func (m *frameMachine) evalCompilationUnit(b *buf, pc uint64) (int64, error) {
err := m.parseCIE(b)
if err != nil {
return 0, err
}
for {
offset, found, err := m.scanFDE(b, pc)
if err != nil {
return 0, err
}
if found {
return offset, nil
}
}
}
// parseCIE assumes the incoming buffer starts with a CIE block and parses it
// to initialize a frameMachine.
func (m *frameMachine) parseCIE(allBuf *buf) error {
length := int(allBuf.uint32())
if len(allBuf.data) < length {
return fmt.Errorf("CIE parse error: too short")
}
// Create buffer for just this section.
b := allBuf.slice(length)
cie := b.uint32()
if cie != 0xFFFFFFFF {
return fmt.Errorf("CIE parse error: not CIE: %x", cie)
}
m.version = b.uint8()
if m.version != 3 && m.version != 4 {
return fmt.Errorf("CIE parse error: unsupported version %d", m.version)
}
m.augmentation = b.string()
if len(m.augmentation) > 0 {
return fmt.Errorf("CIE: can't handled augmentation string %q", m.augmentation)
}
if m.version >= 4 {
m.addressSize = b.uint8()
m.segmentSize = b.uint8()
} else {
// Unused. Gc generates version 3, so these values will not be
// set, but they are also not used so it's OK.
}
m.codeAlignmentFactor = b.uint()
m.dataAlignmentFactor = b.int()
m.returnAddressRegister = int(b.uint())
// Initial instructions. At least for Go, establishes SP register number
// and initial value of CFA offset at start of function.
_, err := m.run(&b, ^uint64(0))
if err != nil {
return err
}
// There's padding, but we can ignore it.
return nil
}
// scanFDE assumes the incoming buffer starts with a FDE block and parses it
// to run a frameMachine and, if the PC is represented in its range, return
// the CFA offset for that PC. The boolean returned reports whether the
// PC is in range for this FDE.
func (m *frameMachine) scanFDE(allBuf *buf, pc uint64) (int64, bool, error) {
length := int(allBuf.uint32())
if len(allBuf.data) < length {
return 0, false, fmt.Errorf("FDE parse error: too short")
}
if length <= 0 {
if length == 0 {
// EOF.
return 0, false, fmt.Errorf("PC %#x not found in PC/SP table", pc)
}
return 0, false, fmt.Errorf("bad FDE length %d", length)
}
// Create buffer for just this section.
b := allBuf.slice(length)
cieOffset := b.uint32() // TODO assumes 32 bits.
// Expect 0: first CIE in this segment. TODO.
if cieOffset != 0 {
return 0, false, fmt.Errorf("FDE parse error: bad CIE offset: %.2x", cieOffset)
}
// Initial location.
m.location = b.addr()
addressRange := b.addr()
// If the PC is not in this function, there's no point in executing the instructions.
if pc < m.location || m.location+addressRange <= pc {
return 0, false, nil
}
// The PC appears in this FDE. Scan to find the location.
offset, err := m.run(&b, pc)
if err != nil {
return 0, false, err
}
// There's padding, but we can ignore it.
return offset, true, nil
}
// run executes the instructions in the buffer, which has been sliced to contain
// only the data for this block. When we run out of data, we return.
// Since we are only called when we know the PC is in this block, reaching
// EOF is not an error, it just means the final CFA definition matches the
// tail of the block that holds the PC.
// The return value is the CFA at the end of the block or the PC, whichever
// comes first.
func (m *frameMachine) run(b *buf, pc uint64) (int64, error) {
// We run the machine at location == PC because if the PC is at the first
// instruction of a block, the definition of its offset arrives as an
// offset-defining operand after the PC is set to that location.
for m.location <= pc && len(b.data) > 0 {
op := b.uint8()
// Ops with embedded operands
switch op & 0xC0 {
case frameAdvanceLoc: // (6.4.2.1)
// delta in low bits
m.location += uint64(op & 0x3F)
continue
case frameOffset: // (6.4.2.3)
// Register in low bits; ULEB128 offset.
// For Go binaries we only see this in the CIE for the return address register.
if int(op&0x3F) != m.returnAddressRegister {
return 0, fmt.Errorf("invalid frameOffset register R%d should be R%d", op&0x3f, m.returnAddressRegister)
}
m.returnRegisterOffset = int64(b.uint()) * m.dataAlignmentFactor
continue
case frameRestore: // (6.4.2.3)
// register in low bits
return 0, fmt.Errorf("unimplemented frameRestore(R%d)\n", op&0x3F)
}
// The remaining ops do not have embedded operands.
switch op {
// Row creation instructions (6.4.2.1)
case frameNop:
case frameSetLoc: // op: address
return 0, fmt.Errorf("unimplemented setloc") // what size is operand?
case frameAdvanceLoc1: // op: 1-byte delta
m.location += uint64(b.uint8())
case frameAdvanceLoc2: // op: 2-byte delta
m.location += uint64(b.uint16())
case frameAdvanceLoc4: // op: 4-byte delta
m.location += uint64(b.uint32())
// CFA definition instructions (6.4.2.2)
case frameDefCFA: // op: ULEB128 register ULEB128 offset
m.cfaRegister = int(b.int())
m.cfaOffset = int64(b.uint())
case frameDefCFASf: // op: ULEB128 register SLEB128 offset
return 0, fmt.Errorf("unimplemented frameDefCFASf")
case frameDefCFARegister: // op: ULEB128 register
return 0, fmt.Errorf("unimplemented frameDefCFARegister")
case frameDefCFAOffset: // op: ULEB128 offset
return 0, fmt.Errorf("unimplemented frameDefCFAOffset")
case frameDefCFAOffsetSf: // op: SLEB128 offset
offset := b.int()
m.cfaOffset = offset * m.dataAlignmentFactor
// TODO: Verify we are using a factored offset.
case frameDefCFAExpression: // op: BLOCK
return 0, fmt.Errorf("unimplemented frameDefCFAExpression")
// Register Rule instructions (6.4.2.3)
case frameOffsetExtended: // ops: ULEB128 register ULEB128 offset
// The same as frameOffset, but with the register specified in an operand.
reg := b.uint()
// For Go binaries we only see this in the CIE for the return address register.
if reg != uint64(m.returnAddressRegister) {
return 0, fmt.Errorf("invalid frameOffsetExtended: register R%d should be R%d", reg, m.returnAddressRegister)
}
m.returnRegisterOffset = int64(b.uint()) * m.dataAlignmentFactor
case frameRestoreExtended: // op: ULEB128 register
return 0, fmt.Errorf("unimplemented frameRestoreExtended")
case frameUndefined: // op: ULEB128 register; unimplemented
return 0, fmt.Errorf("unimplemented frameUndefined")
case frameSameValue: // op: ULEB128 register
return 0, fmt.Errorf("unimplemented frameSameValue")
case frameRegister: // op: ULEB128 register ULEB128 register
return 0, fmt.Errorf("unimplemented frameRegister")
case frameRememberState:
return 0, fmt.Errorf("unimplemented frameRememberState")
case frameRestoreState:
return 0, fmt.Errorf("unimplemented frameRestoreState")
case frameExpression: // op: ULEB128 register BLOCK
return 0, fmt.Errorf("unimplemented frameExpression")
case frameOffsetExtendedSf: // op: ULEB128 register SLEB128 offset
return 0, fmt.Errorf("unimplemented frameOffsetExtended_sf")
case frameValOffset: // op: ULEB128 ULEB128
return 0, fmt.Errorf("unimplemented frameValOffset")
case frameValOffsetSf: // op: ULEB128 SLEB128
return 0, fmt.Errorf("unimplemented frameValOffsetSf")
case frameValExpression: // op: ULEB128 BLOCK
return 0, fmt.Errorf("unimplemented frameValExpression")
default:
if frameLoUser <= op && op <= frameHiUser {
return 0, fmt.Errorf("unknown user-defined frame op %#x", op)
}
return 0, fmt.Errorf("unknown frame op %#x", op)
}
}
return m.cfaOffset, nil
}