espHome-NBS-files/tablesoccer.yaml

esphome:
  name: tablesoccer
  platform: ESP8266
  board: nodemcuv2
  on_boot:
    priority: 600
    then:
      - output.turn_on: power_control
      - output.turn_on: st_led

mqtt:
  broker: !secret mqtt_broker_1
  username: !secret mqtt_broker_1_username
  password: !secret mqtt_broker_1_password
  on_connect:
    then:
      - output.turn_off: st_led
  on_disconnect:
    then:
      - output.turn_on: st_led

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  fast_connect: true
logger:

external_components:
  - source:
      type: local
      path: external_components/
    components: [ tablesoccer_btn_helper ]

ota:
  password: !secret streamsign_password

output:
  - platform: gpio
    pin: 14
    id: power_control
  - platform: gpio
    pin:
      number: D0
      mode: output
      inverted: true
    id: st_led

tablesoccer_btn_helper:
  keep_alive: power_control
  reset_pin:
    number: 12
    mode:
      input: true
      pullup: true  
  undo_pin:
    number: 13
    mode:
      input: true
      pullup: true
  id: btn_helper


binary_sensor:
  - platform: gpio
    id: sensor_goal_blue
    pin:
      number: D1
      mode:
        input: true
        pullup: true
    filters:
      - delayed_on: 10ms
    on_press:
      then:
        - lambda: |-
            id(btn_helper).send_score("0");
  - platform: gpio
    id: sensor_goal_red
    pin:
      number: D2
      mode:
        input: true
        pullup: true
    filters:
      - delayed_on: 10ms
    on_press:
      then:
        - lambda: |-
            id(btn_helper).send_score("1");



    
  
#pinMode(5, INPUT_PULLUP);
#pinMode(4, INPUT_PULLUP);

#pinMode(14, OUTPUT);
#pinMode(12, INPUT_PULLUP);
#pinMode(13, INPUT_PULLUP);