Added:

OnBoard LED to turn on while ESP is not connected to MQTT for pingpongfuss and tablesoccer

Changed:
  Garage to no use NO power saving while on wifi

garage1.yaml

@@ -1,5 +1,5 @@
 substitutions:
-  garageSide: sy # sy, wo
+  garageSide: wo # sy, wo
 
 esphome:
   name: garage${garageSide}
@@ -15,6 +15,7 @@ api:
 wifi:
   ssid: !secret wifi_ssid
   password: !secret wifi_password
+  power_save_mode: none
   fast_connect: true
 logger:
   #level: VERY_VERBOSE

pingpongfuss1.yaml

@@ -2,6 +2,10 @@ esphome:
   name: pingfuss1
   platform: ESP8266
   board: nodemcuv2
+  on_boot:
+    priority: 300
+    then:
+      - output.turn_on: st_led
 
 # Enable logging
 logger:
@@ -27,6 +31,20 @@ mqtt:
   broker: !secret mqtt_broker_1
   username: !secret mqtt_broker_1_username
   password: !secret mqtt_broker_1_password
+  on_connect:
+    then:
+      - output.turn_off: st_led
+  on_disconnect:
+    then:
+      - output.turn_on: st_led
+
+output:
+  - platform: gpio
+    pin:
+      number: D0
+      mode: output
+      inverted: true
+    id: st_led
 
 # Example configuration entry
 binary_sensor:

tablesoccer.yaml

@@ -6,11 +6,18 @@ esphome:
     priority: 600
     then:
       - output.turn_on: power_control
+      - output.turn_on: st_led
 
 mqtt:
   broker: !secret mqtt_broker_1
   username: !secret mqtt_broker_1_username
   password: !secret mqtt_broker_1_password
+  on_connect:
+    then:
+      - output.turn_off: st_led
+  on_disconnect:
+    then:
+      - output.turn_on: st_led
 
 wifi:
   ssid: !secret wifi_ssid
@@ -31,6 +38,12 @@ output:
   - platform: gpio
     pin: 14
     id: power_control
+  - platform: gpio
+    pin:
+      number: D0
+      mode: output
+      inverted: true
+    id: st_led
 
 tablesoccer_btn_helper:
   keep_alive: power_control