Settings working, adding steeringmode, limitmode working

platformio.ini

@@ -12,6 +12,7 @@
 platform = espressif32
 board = esp32doit-devkit-v1
 framework = arduino
+build_flags = -DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG
 
 src_filter = +<remote.cpp>
 

src/remote.cpp

@@ -4,14 +4,14 @@
 #include <esp_now.h>
 #include <WiFi.h>
 #include <U8g2lib.h>
-#include <EEPROM.h> // ESP32 ?
+#include <Preferences.h>
 
 #include "mac_config.h"
 #include "graphics.h"
-
 #include "accel.h"
 
 TaskHandle_t clickTaskHandle;
+Preferences preferences;
 
 #define B_VOLT    0
 #define B_VOLT_D  1
@@ -22,6 +22,16 @@ TaskHandle_t clickTaskHandle;
 
 uint8_t boardData[6] = {0, 0, 0, 0, 0, 0};
 
+//#define DEBUG
+
+#ifdef DEBUG
+  #define DEBUG_PRINTLN(x)  Serial.println(x)
+  #define DEBUG_PRINT(x)  Serial.print(x)
+#else
+  #define DEBUG_PRINTLN(x)
+  #define DEBUG_PRINT(x)
+#endif
+
 bool connected = false;
 
 uint8_t clickCounter = 0;
@@ -38,25 +48,17 @@ unsigned long lastSignalBlink;
 bool signalBlink = false;
 unsigned long lastDataRotation;
 
-// Defining variables for Settings menu
+bool beginnerMode = false; // TODO: moved to setting
-bool changeSettings = false;
-bool changeSelectedSetting = false;
-
-bool beginnerMode = false;
 bool steeringMode = false;
 
-bool settingsLoopFlag = false;
-bool settingsChangeFlag = false;
-bool settingsChangeValueFlag = false;
 
 // Defining variables for Hall Effect throttle.
 short hallMeasurement;
 int throttle = 127;
-int sendThrottle = 127;
+uint8_t esc1 = 127;
-byte hallCenterMargin = 5;
+uint8_t esc2 = 127;
 
-byte currentSetting = 0;
+byte hallCenterMargin = 5;
-const byte numOfSettings = 11;
 
 const float minVoltage = 3.4;
 const float maxVoltage = 4.1;
@@ -65,7 +67,6 @@ const float refVoltage = 3.3;
 const float deviderR1 = 1500;
 const float deviderR2 = 22000;
 
-
 // Global copy of board
 esp_now_peer_info_t board;
 #define CHANNEL 1
@@ -82,6 +83,10 @@ esp_now_peer_info_t board;
 #define triggerPin 17
 #define batteryMeasurePin 38
 
+bool triggerActive();
+
+#include "settings.h"
+
 
 // ESPNOW functions ##############################
 // Scan for boards in AP mode
@@ -93,11 +98,11 @@ void ScanForBoard() {
   bool boardFound = 0;
   memset(&board, 0, sizeof(board));
 
-  Serial.println("");
+  DEBUG_PRINTLN("");
   if (scanResults == 0) {
-    Serial.println("No WiFi devices in AP Mode found");
+    DEBUG_PRINTLN("No WiFi devices in AP Mode found");
   } else {
-    Serial.print("Found "); Serial.print(scanResults); Serial.println(" devices ");
+    DEBUG_PRINT("Found "); DEBUG_PRINT(scanResults); DEBUG_PRINTLN(" devices ");
     for (int i = 0; i < scanResults; ++i) {
       // Print SSID and RSSI for each device found
       String SSID = WiFi.SSID(i);
@@ -105,21 +110,21 @@ void ScanForBoard() {
       String BSSIDstr = WiFi.BSSIDstr(i);
 
       if (PRINTSCANRESULTS) {
-        Serial.print(i + 1);
+        DEBUG_PRINT(i + 1);
-        Serial.print(": ");
+        DEBUG_PRINT(": ");
-        Serial.print(SSID);
+        DEBUG_PRINT(SSID);
-        Serial.print(" (");
+        DEBUG_PRINT(" (");
-        Serial.print(RSSI);
+        DEBUG_PRINT(RSSI);
-        Serial.print(")");
+        DEBUG_PRINT(")");
-        Serial.println("");
+        DEBUG_PRINTLN("");
       }
 
       delay(10);
       // Check if the current device starts with `board`
       if (SSID.indexOf("ESK8") == 0) {
         // SSID of interest
-        Serial.println("Found a board.");
+        DEBUG_PRINTLN("Found a board.");
-        Serial.print(i + 1); Serial.print(": "); Serial.print(SSID); Serial.print(" ["); Serial.print(BSSIDstr); Serial.print("]"); Serial.print(" ("); Serial.print(RSSI); Serial.print(")"); Serial.println("");
+        DEBUG_PRINT(i + 1); DEBUG_PRINT(": "); DEBUG_PRINT(SSID); DEBUG_PRINT(" ["); DEBUG_PRINT(BSSIDstr); DEBUG_PRINT("]"); DEBUG_PRINT(" ("); DEBUG_PRINT(RSSI); DEBUG_PRINT(")"); DEBUG_PRINTLN("");
         // Get BSSID => Mac Address of the board
         int mac[6];
         if ( 6 == sscanf(BSSIDstr.c_str(), "%x:%x:%x:%x:%x:%x%c",  &mac[0], &mac[1], &mac[2], &mac[3], &mac[4], &mac[5] ) ) {
@@ -140,9 +145,9 @@ void ScanForBoard() {
   }
 
   if (boardFound) {
-    Serial.println("board Found, processing..");
+    DEBUG_PRINTLN("board Found, processing..");
   } else {
-    Serial.println("board Not Found, trying again.");
+    DEBUG_PRINTLN("board Not Found, trying again.");
   }
 
   // clean up ram
@@ -154,19 +159,19 @@ void deletePeer() {
   const esp_now_peer_info_t *peer = &board;
   const uint8_t *peer_addr = board.peer_addr;
   esp_err_t delStatus = esp_now_del_peer(peer_addr);
-  Serial.print("board Delete Status: ");
+  DEBUG_PRINT("board Delete Status: ");
   if (delStatus == ESP_OK) {
     // Delete success
-    Serial.println("Success");
+    DEBUG_PRINTLN("Success");
   } else if (delStatus == ESP_ERR_ESPNOW_NOT_INIT) {
     // How did we get so far!!
-    Serial.println("ESPNOW Not Init");
+    DEBUG_PRINTLN("ESPNOW Not Init");
   } else if (delStatus == ESP_ERR_ESPNOW_ARG) {
-    Serial.println("Invalid Argument");
+    DEBUG_PRINTLN("Invalid Argument");
   } else if (delStatus == ESP_ERR_ESPNOW_NOT_FOUND) {
-    Serial.println("Peer not found.");
+    DEBUG_PRINTLN("Peer not found.");
   } else {
-    Serial.println("Not sure what happened");
+    DEBUG_PRINTLN("Not sure what happened");
   }
 }
 
@@ -178,76 +183,75 @@ bool manageBoard() {
       deletePeer();
     }
 
-    Serial.print("board Status: ");
+    DEBUG_PRINT("board Status: ");
     const esp_now_peer_info_t *peer = &board;
     const uint8_t *peer_addr = board.peer_addr;
     // check if the peer exists
     bool exists = esp_now_is_peer_exist(peer_addr);
     if ( exists) {
       // board already paired.
-      Serial.println("Already Paired");
+      DEBUG_PRINTLN("Already Paired");
       return true;
     } else {
       // board not paired, attempt pair
       esp_err_t addStatus = esp_now_add_peer(peer);
       if (addStatus == ESP_OK) {
         // Pair success
-        Serial.println("Pair success");
+        DEBUG_PRINTLN("Pair success");
         return true;
       } else if (addStatus == ESP_ERR_ESPNOW_NOT_INIT) {
         // How did we get so far!!
-        Serial.println("ESPNOW Not Init");
+        DEBUG_PRINTLN("ESPNOW Not Init");
         return false;
       } else if (addStatus == ESP_ERR_ESPNOW_ARG) {
-        Serial.println("Invalid Argument");
+        DEBUG_PRINTLN("Invalid Argument");
         return false;
       } else if (addStatus == ESP_ERR_ESPNOW_FULL) {
-        Serial.println("Peer list full");
+        DEBUG_PRINTLN("Peer list full");
         return false;
       } else if (addStatus == ESP_ERR_ESPNOW_NO_MEM) {
-        Serial.println("Out of memory");
+        DEBUG_PRINTLN("Out of memory");
         return false;
       } else if (addStatus == ESP_ERR_ESPNOW_EXIST) {
-        Serial.println("Peer Exists");
+        DEBUG_PRINTLN("Peer Exists");
         return true;
       } else {
-        Serial.println("Not sure what happened");
+        DEBUG_PRINTLN("Not sure what happened");
         return false;
       }
     }
   } else {
     // No board found to process
-    Serial.println("No board found to process");
+    DEBUG_PRINTLN("No board found to process");
     return false;
   }
 }
 
 // send data
 void sendData() {
-  uint8_t esc1 = sendThrottle;
+  const uint8_t data[] = { esc1, esc2 };
-  uint8_t esc2 = esc1;
+  //const uint8_t data[] = { esc1, esc2, options};
 
-  const uint8_t data[] = { esc1, esc2 }; // no mixture for the normal mode
 
   const uint8_t *peer_addr = board.peer_addr;
-  Serial.print("Sending: "); Serial.println(esc1);
+  DEBUG_PRINT("Sending: "); DEBUG_PRINTLN(esc1);
   esp_err_t result = esp_now_send(peer_addr, data, sizeof(data));
-  Serial.print("Send Status: ");
+  DEBUG_PRINT("Send Status: ");
   if (result == ESP_OK) {
-    Serial.println("Success");
+    DEBUG_PRINTLN("Success");
   } else if (result == ESP_ERR_ESPNOW_NOT_INIT) {
     // How did we get so far!!
-    Serial.println("ESPNOW not Init.");
+    DEBUG_PRINTLN("ESPNOW not Init.");
   } else if (result == ESP_ERR_ESPNOW_ARG) {
-    Serial.println("Invalid Argument");
+    DEBUG_PRINTLN("Invalid Argument");
   } else if (result == ESP_ERR_ESPNOW_INTERNAL) {
-    Serial.println("Internal Error");
+    DEBUG_PRINTLN("Internal Error");
   } else if (result == ESP_ERR_ESPNOW_NO_MEM) {
-    Serial.println("ESP_ERR_ESPNOW_NO_MEM");
+    DEBUG_PRINTLN("ESP_ERR_ESPNOW_NO_MEM");
   } else if (result == ESP_ERR_ESPNOW_NOT_FOUND) {
-    Serial.println("Peer not found.");
+    DEBUG_PRINTLN("Peer not found.");
   } else {
-    Serial.println("Not sure what happened");
+    DEBUG_PRINTLN("Not sure what happened");
   }
 }
 
@@ -256,14 +260,14 @@ void OnDataSent(const uint8_t *mac_addr, esp_now_send_status_t status) {
   char macStr[18];
   snprintf(macStr, sizeof(macStr), "%02x:%02x:%02x:%02x:%02x:%02x",
            mac_addr[0], mac_addr[1], mac_addr[2], mac_addr[3], mac_addr[4], mac_addr[5]);
-  Serial.print("Last Packet Sent to: "); Serial.println(macStr);
+  DEBUG_PRINT("Last Packet Sent to: "); DEBUG_PRINTLN(macStr);
-  Serial.print("Last Packet Send Status: ");
+  DEBUG_PRINT("Last Packet Send Status: ");
   if(status == ESP_NOW_SEND_SUCCESS) {
     connected = true;
-    Serial.println("Delivery Success");
+    DEBUG_PRINTLN("Delivery Success");
   } else {
     connected = false;
-    Serial.println("Delivery Fail");
+    DEBUG_PRINTLN("Delivery Fail");
   }
 }
 
@@ -272,18 +276,18 @@ void OnDataRecv(const uint8_t *mac_addr, const uint8_t *data, int data_len) {
   char macStr[18];
   snprintf(macStr, sizeof(macStr), "%02x:%02x:%02x:%02x:%02x:%02x",
            mac_addr[0], mac_addr[1], mac_addr[2], mac_addr[3], mac_addr[4], mac_addr[5]);
-  Serial.print("Last Response Recv from: "); Serial.println(macStr);
+  DEBUG_PRINT("Last Response Recv from: "); DEBUG_PRINTLN(macStr);
   memcpy(boardData, data, data_len);
-  Serial.print("Recieved data! len: ");
+  DEBUG_PRINT("Recieved data! len: ");
-  Serial.println(data_len);
+  DEBUG_PRINTLN(data_len);
 }
 
 //############ End ESP Now
 
 //############ Hardware Helpers
-// Check if an integer is within a min and max value
+
-bool inRange(int val, int minimum, int maximum) {
+int c_map(int value, int inMin, int inMax, int outMin, int outMax) {
-  return ((minimum <= val) && (val <= maximum));
+  return constrain(map(value, inMin, inMax, outMin, outMax), outMin, outMax);
 }
 
 // Return true if trigger is activated, false otherwice
@@ -305,15 +309,18 @@ void calculateThrottlePosition() {
   for (int i = 0; i < 10; i++) {
     total += analogRead(leverPin);
   }
+
   hallMeasurement = total / 10;
-  Serial.print("HAL: ");
+  DEBUG_PRINT("HAL: ");
-  Serial.println(hallMeasurement);
+  DEBUG_PRINTLN(hallMeasurement);
-  //DEBUG_PRINT( (String)hallMeasurement );
+
+  int maxSpeed = 255;
+  if(settings[limitMode] == 1) maxSpeed = 190;
 
   if (hallMeasurement >= HAL_CENTER) {
-    throttle = constrain(map(hallMeasurement, HAL_CENTER, HAL_MAX, 127, 255), 127, 255);
+    throttle = c_map(hallMeasurement, HAL_CENTER, HAL_MAX, 127, maxSpeed);
   } else {
-    throttle = constrain(map(hallMeasurement, HAL_MIN, HAL_CENTER, 0, 127), 0, 127);
+    throttle = c_map(hallMeasurement, HAL_MIN, HAL_CENTER, 0, 127);
   }
   // removeing center noise
   if (abs(throttle - 127) < hallCenterMargin) {
@@ -332,8 +339,8 @@ float batteryVoltage() {
   batteryVoltage = (refVoltage / 4095.0) * ((float)total / 10.0);
   // Now we have the actual Voltage, lets calculate the value befor the devider
   batteryVoltage = batteryVoltage / ( deviderR1 / (deviderR1 + deviderR2));
-  Serial.print("Batt: ");
+  DEBUG_PRINT("Batt: ");
-  Serial.println(batteryVoltage);
+  DEBUG_PRINTLN(batteryVoltage);
   return batteryVoltage;
 }
 
@@ -362,29 +369,30 @@ int getStrength(int points){
   }
 
   averageRSSI=rssi/points;
-  Serial.print("RSSI: ");
+  DEBUG_PRINT("RSSI: ");
-  Serial.println(averageRSSI);
+  DEBUG_PRINTLN(averageRSSI);
   return averageRSSI;
 }
 
 void checkClicks(void * parameter) {
   for (;;) {
-    //Serial.print("Trig: "); Serial.print(triggerActive()); Serial.print(" LAST: "); Serial.println(lastTriggerState);
+    //DEBUG_PRINT("Trig: "); DEBUG_PRINT(triggerActive()); DEBUG_PRINT(" LAST: "); DEBUG_PRINTLN(lastTriggerState);
     if(millis()-lastClick > clickDiff && clickCounter!=0) {
-      Serial.println("reset");
+      DEBUG_PRINTLN("reset");
       clickCounter = 0;
     }
 
     if(!triggerActive() && lastTriggerState) {
-      Serial.println("CLICK##################### ");
+      DEBUG_PRINTLN("CLICK##################### ");
       int timeSinceLastClick = millis()-lastClick;
       lastClick = millis();
 
       if(timeSinceLastClick < clickDiff) clickCounter++;
       else clickCounter = 1;
       if(clickCounter == 3) {
-        Serial.println("YEAH TRIPPLE");
+        DEBUG_PRINTLN("YEAH TRIPPLE");
-        steeringMode = !steeringMode;
+        if(changeSettings) changeSettings = false;
+        else steeringMode = !steeringMode;
         vTaskDelay(pdMS_TO_TICKS(2000));
       }
 
@@ -569,99 +577,19 @@ void drawPage() {
   u8g2.drawStr(x + 86 + 2, y + 13, displayBuffer);
 
 }
-
+void drawMode() {
-void drawSettingsMenu() {
+  if(steeringMode) {
-  /*
+    displayString = (String)esc1 + " |S| " + (String)esc2;
-     // Position on OLED
+    displayString.toCharArray(displayBuffer, 12);
-     int x = 0; int y = 10;
-
-     // Draw setting title
-     displayString = settingPages[currentSetting][0];
-     displayString.toCharArray(displayBuffer, displayString.length() + 1);
-
     u8g2.setFont(u8g2_font_profont12_tr);
-     u8g2.drawStr(x, y, displayBuffer);
+    u8g2.drawStr(25, 50, displayBuffer);
-
-     int val = getSettingValue(currentSetting);
-
-     displayString = (String)val + "" + settingPages[currentSetting][1];
-     displayString.toCharArray(displayBuffer, displayString.length() + 1);
-     u8g2.setFont(u8g2_font_10x20_tr  );
-
-     if (changeSelectedSetting == true) {
-     u8g2.drawStr(x + 10, y + 20, displayBuffer);
-     } else {
-     u8g2.drawStr(x, y + 20, displayBuffer);
   }
-   */
+  if(settings[limitMode] == 1) {
+    displayString = "LIM";
+    displayString.toCharArray(displayBuffer, 12);
+    u8g2.setFont(u8g2_font_profont12_tr);
+    u8g2.drawStr(105, 50, displayBuffer);
   }
-
-void controlSettingsMenu() {
-  /*
-     if (triggerActive()) {
-     if (settingsChangeFlag == false) {
-
-      // Save settings to EEPROM
-      if (changeSelectedSetting == true) {
-        updateEEPROMSettings();
-      }
-
-      changeSelectedSetting = !changeSelectedSetting;
-      settingsChangeFlag = true;
-     }
-     } else {
-     settingsChangeFlag = false;
-     }
-
-     if (hallMeasurement >= (remoteSettings.maxHallValue - 150) && settingsLoopFlag == false) {
-     // Up
-     if (changeSelectedSetting == true) {
-      int val = getSettingValue(currentSetting) + 1;
-
-      if (inRange(val, settingRules[currentSetting][1], settingRules[currentSetting][2])) {
-        setSettingValue(currentSetting, val);
-        settingsLoopFlag = true;
-      }
-     } else {
-      if (currentSetting != 0) {
-        currentSetting--;
-        settingsLoopFlag = true;
-      }
-     }
-     }
-     else if (hallMeasurement <= (remoteSettings.minHallValue + 150) && settingsLoopFlag == false) {
-     // Down
-     if (changeSelectedSetting == true) {
-      int val = getSettingValue(currentSetting) - 1;
-
-      if (inRange(val, settingRules[currentSetting][1], settingRules[currentSetting][2])) {
-        setSettingValue(currentSetting, val);
-        settingsLoopFlag = true;
-      }
-     } else {
-      if (currentSetting < (numOfSettings - 1)) {
-        currentSetting++;
-        settingsLoopFlag = true;
-      }
-     }
-     } else if (inRange(hallMeasurement, remoteSettings.centerHallValue - 50, remoteSettings.centerHallValue + 50)) {
-     settingsLoopFlag = false;
-     }*/
-}
-
-void drawSettingNumber() {
-  // Position on OLED
-  int x = 2; int y = 10;
-
-  // Draw current setting number box
-  u8g2.drawRFrame(x + 102, y - 10, 22, 32, 4);
-
-  // Draw current setting number
-  displayString = (String)(currentSetting + 1);
-  displayString.toCharArray(displayBuffer, displayString.length() + 1);
-
-  u8g2.setFont(u8g2_font_profont22_tn);
-  u8g2.drawStr(x + 108, 22, displayBuffer);
 }
 
 void updateMainDisplay() {
@@ -677,6 +605,7 @@ void updateMainDisplay() {
       drawPage();
       drawBatteryLevel();
       drawSignal();
+      drawMode();
     }
 
   } while ( u8g2.nextPage() );
@@ -701,7 +630,9 @@ void setup() {
   Serial.begin(115200);
   //Set device in STA mode to begin with
   WiFi.mode(WIFI_STA);
-  Serial.println("ESPNowSkate");
+  DEBUG_PRINTLN("ESPNowSkate");
+
+  loadSettings();
 
   // reset the screen
   pinMode(16, OUTPUT);
@@ -725,7 +656,7 @@ void setup() {
 
   initAccel();
 
-  Serial.println("ESPNowSkate Sender");
+  DEBUG_PRINTLN("ESPNowSkate Sender");
   u8g2.begin();
   drawStartScreen();
 
@@ -735,13 +666,13 @@ void setup() {
   }
 
   // This is the mac address of the Master in Station Mode
-  Serial.print("STA MAC: "); Serial.println(WiFi.macAddress());
+  DEBUG_PRINT("STA MAC: "); DEBUG_PRINTLN(WiFi.macAddress());
 
   if (esp_now_init() == ESP_OK) {
-    Serial.println("ESPNow Init Success");
+    DEBUG_PRINTLN("ESPNow Init Success");
   }
   else {
-    Serial.println("ESPNow Init Failed");
+    DEBUG_PRINTLN("ESPNow Init Failed");
     ESP.restart();
   }
 
@@ -767,22 +698,49 @@ void loop() {
   updateMainDisplay();
 
   readAccel();
-  Serial.print("Accel Values: ");
+
-  Serial.print(AcX);
+  Serial.print("Accel Value Left Right( Y): ");
-  Serial.print(" ");
+  Serial.print(map(AcY, -15000, 15000, -100, 100));
-  Serial.println(GyX);
+  Serial.print("Help(Y): ");
+  Serial.println(map(GyY, -15000, 15000, -100, 100));
 
   calculateThrottlePosition();
   if (changeSettings == true) {
     // Use throttle and trigger to change settings
-    //controlSettingsMenu();
+    controlSettingsMenu();
   } else {
     // Use throttle and trigger to drive motors
     if (triggerActive()) {
-      sendThrottle = throttle;
+      if(!steeringMode) {
+        esc1 = (uint8_t) throttle;
+        esc2 = (uint8_t) throttle;
+      } else {
+        DEBUG_PRINT("Value: ");
+        int map = c_map(AcX, 15000, -15000, -50, 50);
+        DEBUG_PRINTLN(map);
+
+        esc1 = (uint8_t) constrain(throttle + map, 0, 200);
+        esc2 = (uint8_t) constrain(throttle - map, 0, 200);
+
+        if(throttle == 127) {
+          esc1 = 127;
+          esc2 = 127;
+        }
+
+        DEBUG_PRINT("SteeringMode: ESC1: "); DEBUG_PRINT(esc1); DEBUG_PRINT(" ESC2: "); DEBUG_PRINTLN(esc2);
+      }
+
     } else {
       // 127 is the middle position - no throttle and no brake/reverse
-      sendThrottle = 127;
+      esc1 = 127;
+      esc2 = 127;
+      if(throttle < 30) { // enter settings mode
+        changeSettings = true;
+      }
+      // could use the other side for cruise control...
+      if(throttle > 230) {
+      }
+    }
   }
 
   // If board is found, it would be populate in `board` variable
@@ -795,11 +753,10 @@ void loop() {
       sendData();
     } else {
       // board pair failed
-        Serial.println("board not found / paired!");
+      DEBUG_PRINTLN("board not found / paired!");
     }
   }
   else {
     // No board found to process
   }
 }
-}

src/settings.h

@@ -0,0 +1,212 @@
+uint8_t currentSetting = 0;
+#define SETTINGS_COUNT 7
+
+#define limitMode 0
+#define fanOveride 1
+#define wheelDiameter 2 // Speed factor
+#define minHallValue 3
+#define centerHallValue 4
+#define maxHallValue 5
+
+int settings[SETTINGS_COUNT];
+
+float gearRatio;
+float ratioRpmSpeed;
+float ratioPulseDistance;
+
+// Defining variables for Settings menu
+bool changeSettings = false;
+bool changeSelectedSetting = false;
+
+bool settingsLoopFlag = false;
+bool settingsChangeFlag = false;
+bool settingsChangeValueFlag = false;
+
+const char *settingPages[SETTINGS_COUNT] = {
+  "LimitMode",
+  "FanOveride",
+  "TriggerMode",
+  "Wheel diameter",
+  "Throttle Min",
+  "Throttle Center",
+  "Throttle Max"
+};
+
+// Setting rules format: default, min, max.
+int settingRules[SETTINGS_COUNT][3] {
+  {0, 0, 1}, // default is no limit
+  {0, 0, 2},   // 0 no, 1 on, 2 off
+  {0, 0, 3}, // 0 Killswitch, 1 cruise & 2 data toggle
+  {83, 0, 250}, // wheel mm
+  {HAL_MIN, 1000, 2000},
+  {HAL_CENTER, 1000, 2000},
+  {HAL_MAX, 1000, 2000}
+};
+/*
+   const char *settingAliases[SETTINGS_COUNT] = {
+   "Off", "ON"
+   "Auto", "Off", "On",
+   //"Wheel diameter",
+   //"Throttle Min",
+   //"Throttle Center",
+   //"Throttle Max"
+   };
+ */
+// Check if an integer is within a min and max value
+bool inRange(int val, int minimum, int maximum) {
+  return ((minimum <= val) && (val <= maximum));
+}
+
+void updateSettings() {
+  preferences.begin("remote-set", false);
+  for (int i = 0; i < SETTINGS_COUNT; i++) {
+    preferences.putInt(settingPages[i], settings[i]);
+  }
+  preferences.end();
+  DEBUG_PRINTLN("UPDATED");
+  preferences.begin("remote-set", false);
+  DEBUG_PRINTLN(preferences.getInt(settingPages[0], 0));
+  preferences.end();
+  //calculateRatios();
+}
+
+void setDefaultSettings() {
+  for (int i = 0; i < SETTINGS_COUNT; i++) {
+    settings[i] = settingRules[i][0];
+  }
+
+  updateSettings();
+}
+
+void loadSettings() {
+  preferences.begin("remote-set", false);
+  for (int i = 0; i < SETTINGS_COUNT; i++) {
+    settings[i] = preferences.getInt(settingPages[i], settingRules[i][0]); // retrieve default value
+  }
+  preferences.end();
+
+
+  bool rewriteSettings = false;
+
+  // Loop through all settings to check if everything is fine
+  for (int i = 0; i < SETTINGS_COUNT; i++) {
+    int val = settings[i];
+
+    if (!inRange(val, settingRules[i][1], settingRules[i][2])) {
+      // Setting is damaged or never written. Rewrite default.
+      rewriteSettings = true;
+      settings[i] = settingRules[i][0];
+    }
+  }
+
+  if (rewriteSettings == true) {
+    updateSettings();
+  } else {
+    // Calculate constants
+    //calculateRatios();
+  }
+}
+
+void drawSettingsMenu() {
+  // Position on OLED
+  int x = 0; int y = 10;
+
+  // Draw setting title
+  displayString = settingPages[currentSetting];
+  displayString.toCharArray(displayBuffer, displayString.length() + 1);
+
+  u8g2.setFont(u8g2_font_profont12_tr);
+  u8g2.drawStr(x, y, displayBuffer);
+
+  int val = settings[currentSetting];
+
+  displayString = (String)val + ""; //+ settingPages[currentSetting][1];
+  displayString.toCharArray(displayBuffer, displayString.length() + 1);
+  u8g2.setFont(u8g2_font_10x20_tr  );
+
+  if (changeSelectedSetting == true) {
+    u8g2.drawStr(x + 10, y + 20, displayBuffer);
+  } else {
+    u8g2.drawStr(x, y + 20, displayBuffer);
+  }
+}
+
+void drawSettingNumber() {
+  // Position on OLED
+  int x = 2; int y = 10;
+
+  // Draw current setting number box
+  u8g2.drawRFrame(x + 102, y - 10, 22, 32, 4);
+
+  // Draw current setting number
+  displayString = (String)(currentSetting + 1);
+  displayString.toCharArray(displayBuffer, displayString.length() + 1);
+
+  u8g2.setFont(u8g2_font_profont22_tn);
+  u8g2.drawStr(x + 108, 22, displayBuffer);
+}
+
+/*
+   // Update values used to calculate speed and distance travelled.
+   void calculateRatios() {
+   // Defining variables for speed and distance calculation
+
+   gearRatio = (float)remoteSettings.motorPulley / (float)remoteSettings.wheelPulley;
+
+   ratioRpmSpeed = (gearRatio * 60 * (float)remoteSettings.wheelDiameter * 3.14156) / (((float)remoteSettings.motorPoles / 2) * 1000000); // ERPM to Km/h
+
+   ratioPulseDistance = (gearRatio * (float)remoteSettings.wheelDiameter * 3.14156) / (((float)remoteSettings.motorPoles * 3) * 1000000); // Pulses to km travelled
+   }
+ */
+void controlSettingsMenu() {
+  if (triggerActive()) {
+    if (settingsChangeFlag == false) {
+
+      // Save settings
+      if (changeSelectedSetting == true) {
+        updateSettings();
+      }
+
+      changeSelectedSetting = !changeSelectedSetting;
+      settingsChangeFlag = true;
+    }
+
+  } else {
+    settingsChangeFlag = false;
+  }
+
+  if (hallMeasurement >= (HAL_MAX - 250) && settingsLoopFlag == false) { //settings[maxHallValue]
+    // Up
+    if (changeSelectedSetting == true) {
+      int val = settings[currentSetting] - 1;
+
+      if (inRange(val, settingRules[currentSetting][1], settingRules[currentSetting][2])) {
+        settings[currentSetting] = val;
+
+        settingsLoopFlag = true;
+      }
+    } else {
+      if (currentSetting != 0) {
+        currentSetting--;
+        settingsLoopFlag = true;
+      }
+    }
+  } else if (hallMeasurement <= (HAL_MIN + 250) && settingsLoopFlag == false) { //settings[minHallValue]
+    // Down
+    if (changeSelectedSetting == true) {
+      int val = settings[currentSetting] + 1;
+
+      if (inRange(val, settingRules[currentSetting][1], settingRules[currentSetting][2])) {
+        settings[currentSetting] = val;
+        settingsLoopFlag = true;
+      }
+    } else {
+      if (currentSetting < (SETTINGS_COUNT - 1)) {
+        currentSetting++;
+        settingsLoopFlag = true;
+      }
+    }
+  } else if (inRange(hallMeasurement, HAL_CENTER - 50, HAL_CENTER + 50)) { // settings[centerHallValue]
+    settingsLoopFlag = false;
+  }
+}