Almost working

This commit is contained in:
Lukas Bachschwell 2019-05-17 18:31:54 +02:00
parent b5c050ff47
commit e3d514d931
7 changed files with 172 additions and 77 deletions

View File

@ -1,5 +1,5 @@
{
"board": "esp8266:esp8266:d1",
"configuration": "xtal=80,vt=flash,exception=disabled,eesz=4M,ip=lm2f,dbg=Disabled,lvl=None____,wipe=none,baud=921600",
"port": "/dev/cu.wchusbserial230"
"port": "/dev/cu.wchusbserial144220"
}

Binary file not shown.

Binary file not shown.

19
README.md Normal file
View File

@ -0,0 +1,19 @@
# Audio2 Cabin Light System by lbsfilm
This is a simple system of lights for the phone system of Audio 2
There is a controller and 4 clients, all built into the light cylinders
## Software
The controller is running EspAsyncWebserver and the clients run a websocket client library.
There is no kind of encryption (HTTP Basic Auth can be enabeled in the code though)
## Hardware
All Boards are built uisng the ESP32 POE Board (non isolated) by OLIMEX
### Pinings
Every Board is connected to the Lamp by a single GPO, The power has to be taken from the 48Volts of the POE input and be regulated to 12V(?) for the Lamp

View File

@ -13,34 +13,44 @@ platform = espressif32
board = esp32-poe
framework = arduino
upload_port=/dev/tty.wchusbserial230
upload_port=/dev/cu.wchusbserial144220
monitor_baud = 115200
build_flags = -DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG
[env:controller]
platform = espressif32
board = esp32-poe
framework = arduino
monitor_baud = 115200
src_filter = +<controller_main.cpp>
lib_deps =
ESP Async WebServer
[env:LIGHT1]
[env:light1]
src_filter = +<light_main.cpp>
lib_deps =
WebSockets
build_flags = -DROLE=LIGHT1
[env:LIGHT2]
build_flags = -DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG
;build_flags = -DROLE=LIGHT1
[env:light2]
src_filter = +<light_main.cpp>
lib_deps =
WebSockets
build_flags = -DROLE=LIGHT2
[env:LIGHT3]
[env:light3]
src_filter = +<light_main.cpp>
lib_deps =
WebSockets
build_flags = -DROLE=LIGHT3
[env:LIGHT3]
[env:light4]
src_filter = +<light_main.cpp>
lib_deps =
WebSockets

View File

@ -14,32 +14,31 @@ AsyncWebSocket ws("/ws");
const char *PARAM_MESSAGE = "message";
void onWsEvent(AsyncWebSocket * server, AsyncWebSocketClient * client, AwsEventType type, void * arg, uint8_t *data, size_t len){
if(type == WS_EVT_CONNECT){
void onWsEvent(AsyncWebSocket *server, AsyncWebSocketClient *client, AwsEventType type, void *arg, uint8_t *data, size_t len) {
if (type == WS_EVT_CONNECT) {
Serial.printf("ws[%s][%u] connect\n", server->url(), client->id());
client->printf("Hello Client %u :)", client->id());
client->ping();
} else if(type == WS_EVT_DISCONNECT){
} else if (type == WS_EVT_DISCONNECT) {
Serial.printf("ws[%s][%u] disconnect: %u\n", server->url(), client->id());
} else if(type == WS_EVT_ERROR){
Serial.printf("ws[%s][%u] error(%u): %s\n", server->url(), client->id(), *((uint16_t*)arg), (char*)data);
} else if(type == WS_EVT_PONG){
Serial.printf("ws[%s][%u] pong[%u]: %s\n", server->url(), client->id(), len, (len)?(char*)data:"");
} else if(type == WS_EVT_DATA){
AwsFrameInfo * info = (AwsFrameInfo*)arg;
} else if (type == WS_EVT_ERROR) {
Serial.printf("ws[%s][%u] error(%u): %s\n", server->url(), client->id(), *((uint16_t *)arg), (char *)data);
} else if (type == WS_EVT_PONG) {
Serial.printf("ws[%s][%u] pong[%u]: %s\n", server->url(), client->id(), len, (len) ? (char *)data : "");
} else if (type == WS_EVT_DATA) {
AwsFrameInfo *info = (AwsFrameInfo *)arg;
String msg = "";
if(info->final && info->index == 0 && info->len == len){
//the whole message is in a single frame and we got all of it's data
Serial.printf("ws[%s][%u] %s-message[%llu]: ", server->url(), client->id(), (info->opcode == WS_TEXT)?"text":"binary", info->len);
if (info->final && info->index == 0 && info->len == len) {
// the whole message is in a single frame and we got all of it's data
Serial.printf("ws[%s][%u] %s-message[%llu]: ", server->url(), client->id(), (info->opcode == WS_TEXT) ? "text" : "binary", info->len);
if(info->opcode == WS_TEXT){
for(size_t i=0; i < info->len; i++) {
msg += (char) data[i];
if (info->opcode == WS_TEXT) {
for (size_t i = 0; i < info->len; i++) {
msg += (char)data[i];
}
}
if(info->opcode == WS_TEXT)
if (info->opcode == WS_TEXT)
client->text("I got your text message");
} else {
@ -104,7 +103,20 @@ void setup() {
Serial.println("mDNS responder started");
ws.onEvent(onWsEvent);
server.addHandler(&ws);
server.on("/", HTTP_GET, [](AsyncWebServerRequest *request) { request->send(200, "text/plain", "Current Status: To Be done"); });
server.on("/allon", HTTP_GET, [](AsyncWebServerRequest *request) {
ws.textAll("blinkLamp");
request->send(200, "text/plain", "Alarming All");
});
server.on("/alloff", HTTP_GET, [](AsyncWebServerRequest *request) {
ws.textAll("noBlinkLamp");
request->send(200, "text/plain", "Alarm stopped");
});
server.onNotFound(notFound);
server.begin();
@ -114,10 +126,4 @@ void setup() {
void loop() {}
///////////////////////////

View File

@ -1,14 +1,26 @@
#include <Arduino.h>
#include <WebSocketsClient.h>
#include <ESPmDNS.h>
#include <WebSocketsClient.h>
#define ETH_CLK_MODE ETH_CLOCK_GPIO17_OUT
#define ETH_PHY_POWER 12
#include <ETH.h>
WebSocketsClient webSocket;
#define blinkDuration 500
#define connectDuration 1000
#define lampOutputPin 12
bool isBlinking = false;
bool lampState = false;
long blinkTimer = 0;
long connectTimer = 0;
bool foundIp = false;
IPAddress ip;
WebSocketsClient webSocket;
static bool eth_connected = false;
@ -50,38 +62,50 @@ void WiFiEvent(WiFiEvent_t event) {
}
}
void webSocketEvent(WStype_t type, uint8_t * payload, size_t length) {
void blinkLamp() { isBlinking = true; }
switch(type) {
void noBlinkLamp() {
isBlinking = false;
lampState = false;
digitalWrite(lampOutputPin, LOW);
}
void webSocketEvent(WStype_t type, uint8_t *payload, size_t length) {
switch (type) {
case WStype_DISCONNECTED:
USE_SERIAL.printf("[WSc] Disconnected!\n");
Serial.println("[WSc] Disconnected!");
break;
case WStype_CONNECTED: {
USE_SERIAL.printf("[WSc] Connected to url: %s\n", payload);
// send message to server when Connected
webSocket.sendTXT("Connected");
}
break;
Serial.print("[WSc] Connected to controller");
webSocket.sendTXT("event: con lamp: 1");
} break;
case WStype_TEXT:
USE_SERIAL.printf("[WSc] get text: %s\n", payload);
Serial.print("[WSc] get text:");
Serial.println((char *)payload);
if (strcmp((char *)payload, "blinkLamp") == 0) {
blinkLamp();
Serial.println("Enable Blinking!");
} else if (strcmp((char *)payload, "noBlinkLamp") == 0) {
noBlinkLamp();
Serial.println("Disable Blinking!");
}
// send message to server
// webSocket.sendTXT("message here");
break;
case WStype_BIN:
USE_SERIAL.printf("[WSc] get binary length: %u\n", length);
hexdump(payload, length);
Serial.println("[WSc] get binary ");
// send data to server
// webSocket.sendBIN(payload, length);
break;
}
}
void setup() {
Serial.begin(115200);
pinMode(lampOutputPin, OUTPUT);
WiFi.onEvent(WiFiEvent);
ETH.begin();
@ -90,32 +114,68 @@ void setup() {
}
if (!MDNS.begin("a2clight")) {
Serial.println("Error setting up MDNS responder!, system halt");
Serial.println("Error setting up MDNS responder!");
while (1) {
delay(1000);
}
}
Serial.println("mDNS responder started");
}
webSocket.begin("a2clcontroller.local", 80, "/ws");
void browseService(const char *service, const char *proto) {
Serial.printf("Browsing for service _%s._%s.local. ... ", service, proto);
int n = MDNS.queryService(service, proto);
if (n == 0) {
Serial.println("no services found");
} else {
Serial.print(n);
Serial.println(" service(s) found");
for (int i = 0; i < n; ++i) {
// Print details for each service found
Serial.print(" ");
Serial.print(i + 1);
Serial.print(": ");
Serial.print(MDNS.hostname(i));
Serial.print(" (");
Serial.print(MDNS.IP(i));
Serial.print(":");
Serial.print(MDNS.port(i));
Serial.println(")");
if (MDNS.hostname(i) == "a2clcontroller") {
Serial.println("Trying to connect");
Serial.println(MDNS.IP(i));
foundIp = true;
ip = MDNS.IP(i);
webSocket.begin(ip, 80, "/ws");
webSocket.onEvent(webSocketEvent);
// use HTTP Basic Authorization this is optional remove if not needed
//webSocket.setAuthorization("user", "Password");
// try ever 5000 again if connection has failed
webSocket.setReconnectInterval(5000);
// start heartbeat (optional)
// ping server every 15000 ms
// expect pong from server within 3000 ms
// consider connection disconnected if pong is not received 2 times
webSocket.enableHeartbeat(15000, 3000, 2);
// Add service to MDNS-SD
// MDNS.addService("http", "tcp", 80);
// webSocket.setAuthorization("user", "Password");
webSocket.setReconnectInterval(3000);
// webSocket.enableHeartbeat(15000, 3000, 2);
}
}
}
Serial.println();
}
void loop() {
webSocket.loop();
if (!foundIp && eth_connected && ((millis() - connectTimer) > connectDuration)) {
// browseService("http", "tcp");
ip = MDNS.queryHost("a2clcontroller");
Serial.println(ip);
foundIp = true;
webSocket.begin(ip, 80, "/ws");
webSocket.onEvent(webSocketEvent);
// webSocket.setAuthorization("user", "Password");
webSocket.setReconnectInterval(3000);
connectTimer = millis();
}
// webSocket.loop();
if (millis() - blinkTimer > blinkDuration) {
lampState = !lampState;
digitalWrite(lampOutputPin, lampState);
blinkTimer = millis();
}
}